Manuals / Hearth and Home Technologies / Household Appliance / Indoor Fireplace

Hearth and Home Technologies C-40 Non-Combustible Facing Material Installation, Risk of Fire

Models: C-40

1 72
Download 72 pages 25.49 Kb
Page 42
Image 42

E. Non-Combustible Facing Material

Installation

WARNING

Risk of Fire.

• Follow these instructions exactly.

• Facing materials must be installed properly

to prevent fire.

•No materials may be substituted without authorization by Hearth & Home

Technologies.

TOOLS NEEDED: Powered drill with #2 Phillips head bit; caulking gun.

1.Secure the fireplace to the floor or wall framing studs at a minimum of two attachment points to prevent further movement of the fireplace. The same holes and L brack- ets that attached the fireplace to the pallet may be used to secure the fireplace to the sub flooring by using a mini- mum of two 1/4 in. x 2 in. lag bolts or equivalent. Refer to Figure 42.1 and install the two metal hearth strips at this time.

NOTE: All boards are pre-drilled for your convenience.

Boards MUST be attached in the following order: bottom, top, and then the two sides.

2.Attach the bottom board to the bottom of the outer fire- place can with enclosed screws, ensuring the board is centered.

3.Center and attach the top board to the outer can and framing members.

4.Using the Super Calstick, run a light bead (1/8 in. mini- mum) on the butt edges of the top board. See Figure 42.2.

5.Ensuring the top of the side pieces and the top board align, attach the side pieces to the outer can and framing members.

6.Use a wet or dry towel or a soft brush to remove any dust or dirt from facing material. Apply a non-combustible adhesive to attach tile, stone or other non-combustible fin- ishing materials per manufacturer’s instructions.

7.The non-combustible Super Calstick may be used for sealing between the fireplace and the hearth extension.

Refer to Figure 42.3.

1in. (25mm) OVERLAP

 

Metal strips 2 in. (51mm) under edge of

 

Fireplace and Hearth Extension and 2 in.

 

(51mm) on both side of fireplace opening.

Figure 42.1

Nail or screw metal strips in place.

 

Top

 

Board

 

 

Apply bead of

 

Super Calstick to

Side

edge here

Board

 

Bottom

 

Board

Side

 

 

Board

Figure 42.2

 

Seal with non-combustible sealant

Figure 42.3

Figure 42.4 Complete installation

Page 42

Heatilator • Constitution EPA Fireplace • 480-1091C

November 11, 2008

Page 41 Page 43
Page 42
Image 42
Hearth and Home Technologies C-40 warranty Non-Combustible Facing Material Installation, Risk of Fire
Page 41 Page 43

C-40 specifications

Hearth and Home Technologies (HHT) has long been known for its commitment to innovation and quality in the heating and home comfort industry. One of their standout offerings is the C-40, a versatile and efficient gas fireplace that embodies the brand’s dedication to modern aesthetics and advanced technology. This fireplace is designed to not only provide warmth but also enhance the ambiance of any living space.

The C-40 features a sleek, contemporary design that can seamlessly fit into various interior styles. Its clean lines and minimalist frame allow it to serve as a stylish focal point in a room, while offering the functionality and performance that homeowners expect from a high-quality gas fireplace. The unit is available in various configurations, including built-in and wall-mounted options, allowing for flexibility in installation and design.

One of the most notable features of the C-40 is its impressive heat output. With the ability to deliver efficient and evenly distributed warmth, this gas fireplace can effectively heat spaces of various sizes, making it an excellent choice for both small and large rooms. The adjustable flame height feature further enhances the user experience, allowing homeowners to customize their heating preference and create the perfect atmosphere for any occasion.

The C-40 is equipped with cutting-edge technologies, including electronic ignition and a remote control system, making it convenient and easy to use. The electronic ignition ensures quick and reliable startup, while the remote control allows for effortless temperature and flame adjustment from anywhere in the room. This added convenience is a significant benefit for those who value comfort and ease of operation.

Additionally, the C-40 incorporates advanced safety features, such as an automatic shut-off and a secure glass front, providing peace of mind for families. The glass front not only enhances safety but also serves to display the mesmerizing flames beautifully, allowing everyone to enjoy its warmth and glow.

In summary, Hearth and Home Technologies’ C-40 is a prime example of combining stylish design with modern technology and efficiency. Its exceptional heat output, customizable features, and advanced safety measures make it a standout choice for homeowners looking to enhance their living spaces with a dependable gas fireplace. Whether for cozy family gatherings or quiet evenings at home, the C-40 offers both aesthetic appeal and functional excellence, ensuring it remains a popular choice in contemporary home design.