• Press an appropriate RED (
), GREEN
(
), YELLOW (
) or BLUE (
) button
in order to reach the relevant page quickly.
For Toptext
If Toptext transmission is present, colour coded buttons will appear in status row.
If Toptext transmission is not present, status row will not appear.
In Top mode the “P+” or
To exit Teletext
•Press “TV” button. The screen will switch to TV mode.
To Display the Time
•While watching a TV programme with Tele-
text transmission press “
“ button. The current time information, captured from Tele- text will be displayed at the upper middle of the screen.
•If the programme being watched does not have Teletext transmission, no iformation will be displayed.
Connect Peripheral
Equipment
There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you where the different equipment should be connected at the back or the front side of the TV.
Via the Euroconnector
Your TV set has a Euroconnector socket. If you want to connect peripherals (e.g. video, decoder, etc.) which have Euroconnectors, to your TV, use SCART1 or SCART2 inputs.
If an external device is connected via Euro- connector sockets TV is switched to AV mode automatically. If the signal is RGB then the RGB OSD indicator is displayed on the screen.
In AV mode if you press the “ ” button the TV status OSD is displayed on the screen.
Via Ant Input
If you want to connect to your TV, peripherals like video recorders or decoders, but the de- vice you want to connect does not have Euroconnector, you should connect it to the ANT input of your TV set.
If the VCR is connected via antenna input it is suggested to use the Programme 0.
Decoder
Cable TV offers you a wide choice of pro- grams. Most of them are free, others are to be paid for by the viewer. This means that you will need to subscribe to the broadcast- ing organisation whose programmes you wish to receive. This organisation will supply you a corresponding decoder unit to allow the programmes to be unscrambled.
For further information ask your dealer. See also the booklet supplied with your decoder.
Connect a decoder with an aerial socket to the TV
• Connect the aerial cable.
Connect a decoder without an aerial socket to the TV
•Connect the decoder to your TV with a eurocable (RCA Jack Cable) to EXTERNAL. When your decoder has a Euroconnector you can obtain better picture quality if you connect a eurocable to EXTERNAL .
TV and Video Recorder
• Connect the aerial cables.
Better picture quality can be obtained if you also connect a eurocable to EXTERNAL sockets.
- 19 -