Optimus 16-549, 632, 550 VCR Setup, Setting the VCR’S Output Channel Switch, Remote Control

Page 14

16-549.fm Page 14 Tuesday, July 20, 1999 5:04 PM

VCR SETUP

SETTING THE VCR’S OUTPUT CHANNEL SWITCH

If you connected the VCR’s OUT TO TV termi- nal to a TV or another VCR, set 3-CH-4on the back of the VCR to 3 or 4, whichever is not an active channel in your area.

When VCR appears on the display, the VCR sends the signal from the video source con- nected to its IN FROM ANTENNA or AUDIO IN 1/ VIDEO IN 1 (or AV2 for the Model 62) terminals to the TV on the channel you selected.

Note: Setting 3-CH-4 has no effect on the TV when the VCR is off or if you connected a TV with separate audio/video input jacks to the VCR’s AUDIO 1/VIDEO 1 OUT jacks.

REMOTE CONTROL

Installing Batteries

The remote control requires two AA batteries (not supplied). For the longest operation and best performance, we recommend alkaline bat- teries (such as RadioShack Cat. No. 23-557).

Cautions:

2.Put fresh batteries in the compartment, as indicated by the polarity symbols (+ and –) marked inside.

3. Replace the cover.

Note: When the remote control stops working or operates poorly, replace both batteries.

Cautions:

•Never leave dead or weak batteries in the remote control. Batteries can leak chemi- cals that can damage your remote control.

•Dispose of dead batteries promptly and properly; do not bury or burn them.

Using the Remote Control

•Use only fresh batteries of the required size and type.

•Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities.

1.Press the tab on the battery compartment cover and lift off the cover in the direction of the arrow.

To use the remote control, aim it at the front of the VCR and press the desired function but- tons.

Tab

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Head VHS HQ VCR Important Safety Instructions Fm Page 3 Tuesday, July 20, 1999 504 PM RECORDING/PLAYBACK FeaturesTuning Tape ControlOther Features Contents Direct Access Index Search Index Scan Before YOU Begin Supplied AccessoriesUsing this Manual Moisture CondensationInstallation Common ConnectionsModel 62 Connections Cable BoxModel 112/113 Connections Models 112/113Home Theater Connections Model 62 Shown CatvConnecting Power Camcorder ConnectionsRemote Control VCR SetupSetting the VCR’S Output Channel Switch Installing BatteriesInitial SET UP Setting the On-Screen Language/ Channels/ClockManually Setting the Clock 1200PMReprogramming Tuner Memory Turning On Auto Clock SetAdding/Erasing Channels Resetting the VCR’s Memory Changing the On-Screen LanguageUsing the VCR Remote Control with Your TV or Cable BOX TV Brand CodeFm Page 20 Tuesday, July 20, 1999 504 PM Operation Using the TV’s TunerUsing the VCR’s Tuner Watching TVPlaying a Video Tape Viewing a Video TapeLoading a Video Tape Tape Motion Controls Special FunctionsSpecial Displays REAL-TIME Counter Using the CounterUsing the Zero Search Function Slow MotionRepeat Play Using Index SearchDirect Access Index Search Index ScanTracking Erase Protection RecordingRecording SPEEDS/TAPE Selection Recording a Program As You Watch It Selecting the Signal to RecordImmediate Recording Automatic Timer Recording Setting a Timer 200PMonitoring an Automatic Timer Recording Checking/Changing TimersClearing a Timer DubbingAUDIO-ONLY Recording Model 62 only Troubleshooting Additional InformationFm Page 35 Tuesday, July 20, 1999 504 PM Care and Maintenance Storing Your Video Cassettes Cleaning the Video HeadsServicing Your VCR Specifications Frequency Response Regular Audio 80 Hz-10 kHz 80 Hz-5 kHz RadioShack Division of Tandy Corporation Fort Worth, Texas
Top Page Image Contents