CAMCORDER CONNECTIONS
Your VCR has jacks on its front panel that let you easily connect a camcorder or other video source.
Notes:
•The Model 61 (shown) needs a stereo audio/video cable for this connection.
•The Model 111 (not shown) needs an audio/video cable for this connection.
AV 2
VIDEO IN | L – AUDIO IN – R |
RECORD/TIME
PLAY
REWIND
POWER CHANNEL
MEMORY SENTINEL
TV/VCR
STOP EJECT
1.Insert the plugs at one end of the cable into the AV 2 AUDIO and VIDEO IN jacks on the VCR’s front panel.
2.Insert the plugs at the other end of the cable into the AUDIO/VIDEO OUT jacks on your cam- corder or other video source. Be sure to connect Video to Video and Audio to Audio (use the plug’s color codes as a guide).
CONNECTING POWER
To power the VCR, plug its power cord into a standard AC outlet.
Note: When you plug in the VCR for the first time, or after a power failure of longer than 24 hours, the VCR prompts you to select a language, then automatically sets channels and the time. When you unplug the VCR and reconnect it within 24 hours, or after a power failure of less than 24 hours, the VCR starts to search for a channel that has an Extended Data Service (EDS) signal (see “Turn- ing On Auto Clock Set” on Page 16).
12