External Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set. Examples are shown below.
Antenna connection.
1.Connect RF out on the VCR to the Antenna input on the rear of the TV
2. | Connect the antenna cable to the antenna in jack on |
| the VCR. |
3. | Use the TV/AV button to select TV mode. |
4. | Press the PLAY button on the VCR. |
COMPONENT INPUT
1. Connect the COMPONENT video
output sockets (Y Cb Cr) of the COMPONENT to the COMPONENT INPUT sockets of the set.
2.Connect the audio cable from the COMPONENT to the COMPONENT INPUT sockets of the set.
3. Press the TV/AV button to select COMPONENT mode.
4. Press the PLAY button on the DVD.
The COMPONENT playback picture appears on the screen.
A/V INPUT
1. Connect the AV out jacks on of the VCR to A/V- In jacks on the TV.
2.Press the TV/AV button to select VIDEO mode.
3.Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the VCR to the L(MONO) socket of the set.
ENGLISH
25