Other functions
TV, VIDEO, COMPONENT and S-VIDEO modes
(You can’t set PC ANALOG and PC DIGITAL mode in this menu. Use the TV/AV button)
Inputs can be set for TV, VIDEO, COMPONENT or S- VIDEO mode. VIDEO mode is used when a Video Cassette Recorder (VCR), or other equipment is connected to the set.
Note: When a VCR is connected to the aerial socket the set is used in TV mode. See the ‘Connection of external equipment’ section.
1.Press the MENU button.
2.Select the Special menu.
3.Press the CH xybutton to select Input.
4.Press the VOLÏqbutton to select TV, VIDEO, COMPONENT and
VIDEO: VIDEO OUT connected to the VIDEO socket of the set.
COMPONENT: COMPONENT connected to the COMPONENT INPUT socket of the set.
Alternatively you can select the TV, VIDEO, COMPONEN- T,
PC ANALOG: PC connected to the
PC DIGITAL: PC connected to the DVI in of the set.
DTV: DTV Set Top Box connected to the DTV IN of the set.
Auto sleep
If you select Auto sleep on the set will automatically switch itself to standby mode approximately ten minutes after a TV Channel stops broadcasting.
1.Press the MENU button, select the Special menu.
2.Press the CHxy button to select Auto sleep.
3.Press the VOLÏq button to select On.
4.Press the TV/AV button to return to normal TV viewing.
Blue back
Channel without signal appear in blue.
Special
Input | TV |
Auto Sleep | Off |
Blue back | Off |
Captions | Off |
xy Ïq MENU TV/AV
ENGLISH
23