16-546.fm Page 15 Tuesday, July 20, 1999 4:25 PM
Using the TV’s
Single VHF/UHF F-Connector
1.Connect the CATV cable directly to the VCR’s VHF/UHF CATV IN input terminal.
75-Ohm Cable
2.Use the supplied 75-ohm cable to connect the VCR’s VHF/UHF CATV OUT F-connector to your TV’s VHF/UHF antenna input F- connector.
Using the TV’s
Single VHF F-Connector and
Double Screw UHF Screw Terminals
If your TV has a single VHF F-connector and double UHF screw terminals, you need a band splitter (such as Cat. No. 15-1231, not sup- plied) to connect your VCR to the separate VHF and UHF terminals.
1.Connect the CATV cable directly to the VCR’s VHF/UHF CATV IN input terminal.
75-Ohm Cable
2.Connect the band splitter’s 75-ohm input cable to the VCR’s VHF/UHF CATV OUT ter- minals.
75-Ohm Cable | |
UHF | VHF |
300-Ohm | |
UHF Output | |
Band Splitter | |
| 75-Ohm |
| VHF Output |
3.Connect the splitter’s VHF 75-ohm F-con- nector to your TV’s single VHF input F-con- nector.
4.Connect the splitter’s UHF 300-ohm gold wires to your TV’s double UHF input screw terminals.
15