Olevia 4-Series manual Disconnect all power sources before making any connections

TV Installation and Connection Guide

Connecting to a Satellite Receiver or Cable Box with Component

Connectors (Secondary Preferred after HDMI)

Disconnect all power sources before making any connections.

Use this method of connection if your Satellite Receiver or Cable Box has component (Y, Pb, Pr) jacks.

1.Using a component video cable, connect the Satellite Receiver or Cable Boxes' Y, Pb and Pr jacks to the Y, Pb and Pr jacks on the TV.

Colors on Component Video connectors:

Y:Green

Pb (also identified as Cb, CB or B-Y): Blue

Pr (also identified as Cr, CR or R-Y): Red

Note: The Y, Pb and Pr jacks on your Satellite Receiver or Cable Box are sometimes labeled as Y, Cb and Cr, or B-Y and R-Y. If so, connect the cables to the matching colors.

2.Using an Audio cable, connect the Satellite Receiver or Cable Boxes' Audio OUT jacks to the TV's Audio in jacks.

For 427~432 Models
Satellite Receiver or Cable Box
Component cable
with RCA connector
Rear of TV
	Audio Output
Ear Phone		Red	Blue	Green
L	R
	Component
Red	Pr/Cr
Audio cable
R	Pb/Cb
L	Y
White
R	R
L	L
CVBS	S-Video
Video
	Firmware
	Upgrade
	Port

Note: The Y, Pb and Pr jacks do not provide audio, so audio cables must be connected to provide sound.

Note: The YPbPr connection provides the best quality of video signal compared to AV (composite) and S-Video connection.

Note: YPbPr is set at default to best perform with HD 720p and 1080i content, set Input to "Interlace DVD" for best performance with regular 480i and 480p content.

(Menu - Picture - Mode - Input = "Interlace DVD")

15