Olevia 4-Series manual Connecting to a PC with VGA Connector

TV Installation and Connection Guide

Connecting to a Blue-Ray DVD Player

or HD-Receiver with HDMI Cables

Disconnect all power sources before making any connections.

1.Using a HDMI cable, connect the DVD's HDMI output terminal to the TV's HDMI-HDCP input terminal.

Note: HDCP is a copy protected digital connection that receives analog or digital video and audio signals from equipment with a HDMI output that features the HDCP function. HDMI allows the transfer of digital uncompressed data to the TV. This connection is superior when compared to the Component, S Video or AV (composite) connections.

Note: HDMI signal is purely digital and provides a better picture, it is better than component, S-Video or Video connections. It is strongly recommended to use this connection if you have this function on your equipment.

For 427~432 Models

Blue-Ray DVD Player / HD-Receiver

HDMI cable

Rear of TV

		L		L
ANT	RS232C	R	VGA/Component HDMI	R
	Control
	Port Input			Input

Connecting to a PC with VGA

Connector

Disconnect all power sources before making any connections.

1.Using a D-Sub 15 pin cable, connect the VGA output terminal of the PC to the TV's VGA signal input terminal.

2.You may need to use a Stereo mini jack to Audio in connectors to receive audio.

For 427~432 Models

PC

			Audio cable
			D-sub 15
			pin cable
	White		Red
Rear of TV
		L		L
ANT	RS232C	R	VGA/Component HDMI	R
	Control
	Port Input			Input

21