Hisense Group MT5380 service manual Source, Pattern, V3A 1024768 Gray-3color For V3A source

5.Factory/Service OSD Menu and Adjustment

5.1To enter the Factory OSD Menu

a. With factory RC (remote control)

1.Press "M" button and enter factory mode.

2.Press "Menu" button and enter factory OSD menu.

3.Press "CH+"/"CH-" button select the function menu, press "VOL+"/"VOL-" enter the selected function menu. Press "VOL+"/"VOL-" button adjust values in the menu.

b.With user's RC

1.PowerTVOn

2.Press Menu button and call up User OSD Menu

3.Select Audio-> Balance

4.Enter 0->5->3 ->2 in sequence.

Note: If necessary, re-do number keys.

5.Factory OSD appears.

6.Press Menu again and leave factory OSD.

5.2Factory OSD Menu

5.2.1 White Balance

Note: Different source has different WB values. Before adjusting, please change to desired source.

1. Auto Color

For VGA and Component Video sources, WB values must be adjusted.

Before adjusting, prepare the signal instruments such as DVD or K-8256 first, and find the video picture with gray and color bars. Then please change to desired source.

	source		Timing	Pattern	Notes
1	ADC	V{3A	1024"768	gray-3color	For V{3A source
2	ADC	HDTV	720P	gray-3color	For Component Video

Notes:

a,	Press	"M"	button		and	enter	factory		mode.
b,	Press	"Menu"		button		and	enter	factory	OSD menu.
c,	Select	the	item	"Auto		Color"
d,	Press	VOL+	button		to auto		color.
e,	Close	the	OSD menu		after	5	seconds.

-14-