To Connect To S-VHS Input
Connect your camera or camcorder
•Connect your equipment to the TV via
EXT-2 S Mode
If the equipment connected to your TV set supports
Connect The Decoder To The Video Recorder
Some video recorders have a special SCART socket for decoder.
•Connect a SCART cable to the SCART socket of your decoder and to the special SCART socket of your video recorder. Refer to the booklet of your video recorder.
•To connect your video recorder to the TV, refer to the TV and Video Recorder section.
If you want to connect more equipment to your TV, consult your dealer.
Connecting Headphones
Use the stereo headphone socket at the right side of the TV, to connect headphones.
Connecting Subwoofer
Use Subwoofer Out socket to connect an exter- nal, active subwoofer to the set to give a much deeper bass effect.
Connecting External Equipment
To connect audio amplifiers or home theatre sys- tems to your TV, use the Audio Line Outs of the TV.
Tips
Care Of The Screen
Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the TV screen coating layer.
Poor Picture
Have you selected the correct TV system? Is your TV set or house aerial located too close to non- earthed audio equipment or neon lights, etc.?
Mountains or high buildings can cause double pic- tures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.
Is the picture or Teletext unrecognisable? Check if you have entered the correct frequency.
The picture quality may degrade when two periph- erals are connected to the TV at the same time. In such a case, disconnect one of the peripherals.
No Picture
Is the aerial connected properly? Are the plugs con- nected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer.
No Picture could mean that your TV is not receiv- ing a transmission. Have you selected the correct button on the remote control?
Sound
Has the mute button been pressed?
Sound is coming from only one of the speakers. Is the balance set to one extreme? See Sound menu.
Remote Control
Your TV no longer responds to the remote control. Perhaps the batteries are exhausted. If so you can still use the local buttons at the side of the TV.
Have you selected the wrong menu? Press the 
button to return to TV mode or press the “M” button to return to the previous menu.
No solution:
Do not attemt to repair the TV yourself. Contact a qualified service engineer.
- 17 -