New Transducers 42PF9830/93 Ambilight menu, Smart colour modes, Ambilight in Standby mode

Settings

TV	Ambilight
Picture	Ambilight
Sound	Brightness
Ambilight	Mode
Features	Colour
	Separation
	Balance
Info
Settings
Ambilight	Mode
Ambilight	Colour
Brightness	Ambience
Mode	Relaxed
Colour	Movie
Separation	Action
Balance
Info
Settings
Ambilight	Colour
Ambilight	Smart colour
Brightness	Palette
Mode	Saturation
Colour
Separation
Balance
Info

Smart colour modes:

•Personal: Select any colour or hue to match to your personal taste, e.g. your interior, the programme content (sports, movie, etc.), the mood you are in, etc.

•Warm white:The colour is matched to that of most normal lightbulbs. Select this setting if you want the Ambilight to fit best with normal living room lighting.

•Cool white:The colour is matched to that of normal daylight (6500K). Select this setting if you prefer more cool lighting.

Note: the 6500 K is the SMPTE recommended setting for ambient backlighting of displays.

•Blue:The blue colour is preferred by most consumers to create a cool, modern and /or mystical atmosphere. Select this setting according to your personal taste or mood.

Ambilight menu

Ambilight is an innovative lighting concept using light with fully adjustable colours at the back of the TV to enhance the viewing experience. Analysis of the picture content adapts the colours continuously, or the lights can be set to any fixed colour and many shades of white. Ambilight creates the ideal viewing environment for your TV resulting in improved relaxed viewing, improved perceived picture detail, contrast and colour.

In standby mode the lights can be set/operated to any colour and create a unique ambiance in the room.

&Select Ambilight in the TV menu.

éPress the cursor right to enter the Ambilight menu.

“Select Ambilight and press the cursor right to select Off or On.

•Off: will switch off the ambient lights and downlight all other ambilight menu items.

•On: the ambient lights will be on. Refine the light settings in the menus below.

‘Select Brightness to adjust the light output of the ambient lights.

(Select Mode and press the cursor right to select Colour, Ambience, Relaxed, Movie or Action.

•Colour: this will show constant light according to the settings in the Ambilight colour menu. See below.

•The options Ambience, Relaxed, Movie and Action will dynamically match brightness and colour to the screen content.

The mode selection made will effect the speed and/or saturation and/or intensity which determines the viewing impression.

E.g. in Relaxed mode, the rate of brightness and colour change is smoothly and soft which gives you a more immersive yet relaxed viewing. Ambience is the rate of brightness and colour change as predefined in the factory.

Movie will influence the perception of a movie whereas Action mode will influence the dynamic impression.

Notes:

-The rate of change is limited, as not to cause uncomfortable sensations.

-According to the selection made, some Ambilight menu items will be downlighted and can not be selected.

§In case Colour has been selected in the Mode menu:

• Select Colour in the Ambilight menu and press the cursor right.

• Select Smart colour and then select Personal, Warm white, Cool white or Blue.

• Select Palette to select the general colour of the light output.

• Select Saturation to adjust the colourfulness of the light. Notes:

-Adjusting the Palette and/or Saturation settings will set the colour mode to Personal.

-The selected colour mode will be the one used when turning on the ambient lights from standby mode.

èIn case Ambience, Relaxed, Movie or Action has been selected in the Mode menu:

•Select Separation in the Ambilight menu and press the cursor right.

•Select Off for a mono behaviour which means that all lamps will behave equally.

•Select Minimum, Medium or Maximum to define the Ambilight stereo effect over the available lamps.

!Select Balance and use the cursor left/right to adjust and generate any colour and level of light intensity on the left and right side of the picture to perfectly match your room setup.

Ambilight in Standby mode

When the TV is switched off, the ambient lights will also be switched off. When the TV is in standby mode, ambilight can be used to provide a unique ambience for the room. Press the AMBILIGHT ON/OFF key on the remote control (see p. 4) to switch between Ambilight Off or On.

Note: Infrared interference

To avoid bad infrared remote control reception, place your peripheral equipments out of sight of the ambient lights of your TV.

Note: Ambilight does not function well when the room temperature is less than 59°F/15°C.

18