Panasonic AJ-SD955Bp manual Moni CH SEL, Pcm, REC CH1, REC CH2, REC CH3, REC CH4, Rec Cue, PB Fade

Setup menus

USER menu		<AUDIO>
No./Item		Description
721	This selects the monitor output.
MONI CH SEL	0000	MANU :
	The output signal is as selected in MONITOR
	SELECT buttons.
	0001	AUTO :
	PCM AUDIO output is selected within the
	–0.43 (–0.5)ato +1a speed range; CUE is
	automatically selected for all other tape
	speeds.
	<Note>
	The value for the DV/DVCAM tape is shown in
	parenthesis ( ).
	0002	PCM :
	The PCM AUDIO signal is output over the
	–10ato +10a range.
	<Note>
	This setup menu’s setting takes effect when CH1,
	CH2, CH3 or CH4 has been selected by the L
	and R MONITOR SELECT buttons on the front
	panel. (If CUE has been selected, the cue signal
	will be output at all the speeds regardless of the
	setup menu’s setting.)
722	This selects the input signal to be recorded
	on the audio CH1 track.
REC CH1
	0000	CH1 : Audio input CH1 signal.
	0001	CH2 : Audio input CH2 signal.
	0002	CH1+2 : Mixed audio input CH1 and CH2
		signal.
723	This selects the input signal to be recorded
	on the audio CH2 track.
REC CH2
	0000	CH1 : Audio input CH1 signal.
	0001	CH2 : Audio input CH2 signal.
	0002	CH1+2 : Mixed audio input CH1 and CH2
		signal.
724	This selects the input signal to be recorded
	on the audio CH3 track.
REC CH3
	0000	CH3 : Audio input CH3 signal
	0001	CH4 : Audio input CH4 signal
	0002	CH3+4 : Mixed audio input CH3 and CH4
		signal
725	This selects the input signal to be recorded
	on the audio CH4 track.
REC CH4
	0000	CH3 : Audio input CH3 signal
	0001	CH4 : Audio input CH4 signal
	0002	CH3+4 : Mixed audio input CH3 and CH4
		signal

The underlined items indicates the initial setting.

No./Item		Description
726	This selects the input signal recorded in CUE.
REC CUE	0001	CH1 : Audio CH1 input
	0002	CH2 : Audio CH2 input
	0003	CH1+2 : Audio CH1 and CH2 MIX signal
	0004	CH3 : Audio CH3 input
	0005	CH4 : Audio CH4 input
	0006	CH3+4 : Audio CH3 and CH4 MIX signal
	0007	CH1~4 : Audio CH1, CH2, CH3 and CH4
		mixed signals
727	This selects the processing method for the
	audio edit points (IN point, OUT point) during
PB FADE	playback.
	0000	AUTO : According to the status during
		recording.
	0001	CUT : Forced CUT
	0002	FADE : Forced FADE
728	This selects whether to superimpose the
	audio data onto the SDI output.
EMBEDDED
AUD	0000	OFF : Data is not superimposed.
	0001	ON : Data is superimposed.
731	This selects whether or not the cue signal is
	to be output to the main line output in the
CUE OUT SEL	search mode.
	0000	OFF : CUE is not output.
	0001	ON : CUE is output.
	<Notes>
	OThis function works only when a setting
	other than MANU has been selected by
	setup menu No. 721 (MONI CH SEL).
	OThe main signal system output channels
	used for the CUE output differ depending on
	the setting selected by setup menu No. 735
	(MON AUTO SEL).
	When L/R is selected:
		CUE is output to CH1 to CH4.
	When L is selected:
		CUE is output to CH1 and CH3.
	When R is selected:
		CUE is output to CH2 and CH4.
	OWhen PCM has been selected as the setup
	menu No. 721 (MONI CH SEL) setting, PCM
	is output.
733	This selects the timing for the output picture
	and CUE output when CUE has been selected
CUE OUT	for monitor output.
	0000 NORMAL : The timing is aligned with the
		output picture.
	0001	DIRECT : Whatever has been recorded on
		the tape is output with no delay.
	<Note>
	When DIRECT has been selected, the timing of
	the output picture and that of the cue output are
	not aligned properly.

50