Panasonic AG-3200P manual Initial Settings, Language Setting, Clock Setting, Preparations

Initial Settings

Language Setting

The default setting is “ENGLISH”.

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. (Daylight Saving Time)/ time zone setting manually. First follow steps 1to 2in “Preparations” above, then go to the following steps.

NOTE:

The time set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

BSelect language

This VCR offers you the language choice to view menus and some messages — in English, Spanish or French. Press rtto move the highlight bar (arrow) to “LANGUAGE”, then press OK or e repeatedly until the desired language is selected.

Press MENU to return to normal screen.

INITIAL SET

CLOCK SET

LANGUAGE ENGLISH GUIDE CHANNEL SET

*CABLE BOX SET

*DBS RECEIVER SET

SELECT WITH ( ,) AND (OK)

PRESS (MENU) TO END

* not function with this VCR

You can either select “AUTO” or enter a PBS channel number. Press OK or eto move the highlight bar to “HOST CH”, then press rtrepeatedly until “AUTO” or the desired PBS channel number is selected.

●Some PBS channels do not transmit clock setting data.

CSelect D.S.T. mode

Language selection will be reset to “ENGLISH” after a power failure occurs.

Clock Setting

Perform clock setting only if the clock has not been set correctly by the Plug&Play setting or if you use a cable box.

Press OK or eto move the highlight bar to “D.S.T.”, then press rtrepeatedly until the desired setting is selected.

AUTO: Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.) Be sure to select the correct time zone manually in step 4.

Preparations

AAccess Main Menu screen, then Initial

Set screen

Press MENU on the Remote. Press rtto move the highlight bar (arrow) to “INITIAL SET”, then press OK or e.

MAIN MENU

FUNCTION SET

TUNER SET

INITIAL SET

PRESS ( ,), THEN (OK)

PRESS (MENU) TO END

ON: Adjustment will be made by the built-in clock itself.

OFF: Select when Daylight Saving Time does not apply to you.

DSelect time zone

Press OK or eto move the highlight bar to “TIME ZONE”, then press rtrepeatedly until “AUTO” or the desired time zone is selected. Each time you press the button, the time zone changes as follows:

* not function with this VCR

EComplete Semiauto Clock Set

Press MENU to return to normal screen. Turn off the VCR. “Aut” will appear on the display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.

Selections of host channel and D.S.T. mode will be reset to “AUTO” after a power failure occurs.