Panasonic PV-DF2002, PV DF2702 manual Connections you’ll need to make

*Important: If a remote control button does not work

Copy Your Tapes (Dubbing) when pressed, press the button on the remote and try the button again.

Connections you’ll need to make Recording (Editing) unit

Playing (Source) VCR
R-AUDIO-L VIDEO	IN FROM
OUT	ANT.	VIDEO IN L-AUDIO IN-R
MONO	OUT TO
IN
	TV

Playback (Source) Recording (Editing) unit

1	Insert pre-	Insert blank tape
	recorded tape.	with record tab.
		• Dubbing tapes protected
		with Copy Guard will have
		poor quality results.
2		Select “LINE” mode.
		See “Selecting Input Mode”below.
3	Press PLAY then	Press REC, then
	PAUSE at starting	Press STILL/PAUSE
	point to put in	immediately to put in
	Standby mode.	Standby mode.

Basic Operation

(Perform operation of steps 4 and 5 on both units at same time.)

4

Press PLAY

to start dubbing.

Press STILL/PAUSE

to start dubbing.

5 STOP

Caution

Press STOP

to stop dubbing.

Press STOP

to stop dubbing.

Selecting Input Mode

•Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement.

•Please note that some tapes cannot be dubbed on this unit. Also, it is not possible to dub DVD/Video CD/CD to VHS tape using this unit.

Method 1:

Press CH . The display will change as follows.

	LINE 2	1	2	3
Method 2:		(CABLE)		(TV)
	LINE 1	125	or	69

aPress ACTION for MAIN MENU.

bPress to select “TV”, thenpress SET for SET UP TV screen.

cPress to select “INPUT SELECT,” and

then press SET to select “TUNER,” “LINE 1” “LINEor 2.”

dPress ACTION twice to exit this mode.

19