6.Select a camera or cameras from the Cameras list (“All Cameras,” “Multiple cameras,” or individual cameras). If you select
“Multiple cameras,” press Enter [or Enter/Shift 
], or select the ellipsis 
next to Cameras. The Select Cameras dialog box opens (refer to Figure 28).
NOTE: By default, all cameras are selected. You must clear the selection for cameras that you do not want to search.
Figure 28. Select Cameras Dialog Box
a.Click the desired cameras [or turn the Jog (inner dial) 
to select a camera and press Enter/Shift 
].
b.Click OK when your list is complete [or navigate to OK and press Enter/Shift 
].
7.Select a video type or types from the Types field (All Types, Multiple Types, Continuous, Motion, Alarms, Manual, Marked, and Locked). If
you select Multiple Types, press Enter [or Enter/Shift 
], or select the ellipsis 
next to Types. The Select Search Type dialog box appears (refer to Figure 29).
NOTE: By default, all types are selected, as indicated by the gray area of the dialog box (refer to Figure 29).
a.Click the desired recording types for your search [or turn the Jog (inner dial) 
to select the recording types and press
Enter/Shift 
].
Figure 29. Search Dialog Box
b. Click OK when your list is complete [or select OK, and then press Enter/Shift 
].
8.Click Search [or press Menu 
] to start the search. The Enhanced Search dialog box displays a list of results along with details about each recording (camera name, start and end times, and recording type).
32 |
|