ACTIVATING A PATTERN
When activated, a pattern will repeat indefinitely until it is cleared, another pattern is set, or the
1.On the PTZ keypad, click a pattern number
2.Click the Pattern button 
.
Figure 27. Activating a Pattern
CLEARING A PATTERN
To clear a pattern:
1.On the PTZ keypad, click Set button 
to enter programming mode.
2.Select a pattern number
3.Click the Pattern button 
.
4.Click the Clr button 
.
5.Click the Pattern 
again.
6.Click the Set button 
again to exit programming mode.
Figure 28. Clearing a Pattern
| 57 |