Pelco dx8100 manual Important Safety Instructions, Regulatory Notices

Page 5

Important Safety Instructions

The DX8100-ISCI SCSI card must be installed inside the DX8100 chassis. To do so, the DX8100 must be taken offline and turned off before starting the upgrade process. Before continuing the upgrade procedure, read these safety instructions.

1.Read the Important Safety Instructions that came with the DX8100. You can access this document at www.Pelco.com. Navigate to Products > Control Site Equipment > Video Recorders > Digital Video Recorders > DX8100 Series Digital Video Recorders > Documents.

2.The security surveillance service provided by the DX8100 is interrupted when it is taken offline.

3.The unit must be shut down and turned off to install the DX8100-ISCI SCSI card.

4.Unplug the power cord from the wall socket, and then unplug it from the rear of the DVR.

WARNING: It is critical that the DX8100 be unplugged for your safety. You must remove the power cord because electrical current continues to flow through the unit even when it is off.

5.Only use attachments/accessories specified by the manufacturer.

6.Make sure you protect the unit and its components from electrostatic discharge (ESD).

7.The currently installed data drive(s) might contain recorded data. If you must remove a data drive, label the drive to make sure it is reinstalled in the same location.

The product and/or manual may bear the following marks:

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

CAUTION:

RISK OF ELECTRIC SHOCK.

DO NOT OPEN.

Regulatory Notices

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RADIO AND TELEVISION INTERFERENCE

This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and the receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

You may also find helpful the following booklet, prepared by the FCC: “How to Identify and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402.

Changes and Modifications not expressly approved by the manufacturer or registrant of this equipment can void your authority to operate this equipment under Federal Communications Commission’s rules.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

C3648M (7/08)

5

Image 5
Contents DX8100 Series Digital Video Recorder List of Tables ContentsList of Illustrations C3648M 7/08 Regulatory Notices Important Safety InstructionsIntroduction About the External Storage UpgradeDX8100HDDI External Video Storage Parts List and ToolsDX8100-ISCI Scsi Card Part Number Description Other DX8100 Optional AccessoriesPreparing the Scsi Card for Installation DX8100-ISCI Scsi Card InstallationRemoving the Chassis Cover Opening the ChassisCPU Understanding the Component LayoutPreparing the Main Capture Card for Removal Moving the Main Capture CardMoving the Main Capture Card Installing the Scsi CardReassembling the Unit Installing the DX8100HDDI Drive Trays Installing a New DX8100 and DX8100HDDI SystemInstalling the Units Opening the Drive Tray Door Turning on the DX8100HDDI and the DX8100 Connecting the DX8100HDDI to the DX8100Upgrading the DX8100 with the DX8100HDDI Hardware InstallationConfiguring the DX8100 C3648M 7/08 Drives Converted to Basic Disk New Partition Wizard Using only DX8100HDDI External Storage C3648M 7/08 Selecting the Allocate Option C3648M 7/08 Deleting the RAID Array Upgrading the DX8100HDDI HDD Storage CapacityBacking UP Recorded Video Data Optional C3648M 7/08 Main Menu Creating the Logical Drive Installing the NEW HddsUnmap the Logical Drive Obtaining AN IP AddressLogical Drives Screen Partitioning the Logical DrivePartition Logical Drive C3648M 7/08 Selecting a Logical Drive Mapping the PartitionsC3648M 7/08 LUN Mapping Formatting the DrivesAllocating the NEW DX8100HDDI Drives Electrical SpecificationsProduct Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 51.25 Kb Manual 8 pages 23.1 Kb Manual 1 pages 21.57 Kb Manual 40 pages 63.45 Kb Manual 92 pages 55.13 Kb Manual 24 pages 36.68 Kb Manual 251 pages 59.12 Kb Manual 264 pages 29.19 Kb Manual 246 pages 50.39 Kb Manual 32 pages 221 b Manual 32 pages 52.96 Kb

dx8100 specifications

The Pelco DX8100 is a robust digital video recorder (DVR) designed for surveillance and security applications, providing a comprehensive solution for video monitoring and recording. Renowned for its advanced features, the DX8100 appeals to both small and large organizations seeking reliable security solutions.

One of the standout features of the DX8100 is its ability to support multiple camera connections, accommodating up to 16 cameras simultaneously. This scalability makes it ideal for a variety of environments, from retail spaces to corporate offices. The DVR supports various video formats, allowing users to integrate different camera types easily.

The DX8100 employs Pelco’s advanced technology for video compression, specifically H.264, which ensures high-quality video recording while optimizing storage usage. This means users can retain more footage without the need for excessive storage devices. Additionally, the system allows for configurable recording schedules, enabling users to select when to record based on specific operational needs, thereby enhancing storage efficiency.

Another key characteristic of the Pelco DX8100 is its user-friendly interface. The DVR features an intuitive navigation system that simplifies accessing footage, configuring settings, and managing devices. Remote connectivity is also a significant advantage; users can access live video and recordings via web browsers or mobile applications from anywhere, providing flexibility in monitoring surveillance feeds.

The DX8100 is equipped with advanced search and playback functionality. Users can quickly locate specific events using date and time searches or can take advantage of the motion detection settings that trigger recordings only when movement is detected. This feature significantly reduces the amount of footage that needs to be reviewed, saving time and improving operational efficiency.

Moreover, the system supports alarm inputs and outputs, which can be integrated with various security devices to create a comprehensive security system. Features like event notifications allow users to be alerted to suspicious activities in real time, enhancing situational awareness.

In summary, the Pelco DX8100 stands out for its impressive camera support, efficient video compression technology, user-friendly interface, and advanced search capabilities. Its flexibility and scalability make it suitable for diverse surveillance needs, while its integration capabilities ensure that businesses can protect their assets efficiently and effectively. The DX8100 remains a reliable choice for organizations committed to enhancing their security infrastructure.