Pelco dx8100 manual Operating the PTZ Controls

OPERATING THE PTZ CONTROLS

To operate the on-screen PTZ controls:

1.On the DX8100 toolbar, click .

2.Select a PTZ-enabled camera from the Site tree.

3.Place the mouse pointer in the middle of the camera’s view pane. The mouse pointer will change to a black cross when on-screen PTZ control is available.

￿

Figure 18. On-Screen PTZ Control

4.Click and hold the left mouse button, and then drag the mouse pointer in the direction you want to move the camera. The display changes to an arrow, indicating the direction of the mouse.

Figure 19. On-Screen PTZ Movement

5. Release the mouse button when you have repositioned the camera to the desired location.

48 C2630M-B (4/08)