To enable the automatic logon feature:
1.Exit the DX8100 application if it is running, and return to the Windows operating system.
2.Click Start > Settings > Control Panel. The Control Panel dialog box opens.
3.
Figure 13. Users and Passwords Dialog Box
4.Click the check box “Users must enter a user name and password to use this computer.”
5.Click the check box again to deselect it and then click Apply. The Automatically Log On dialog box opens.
Figure 14. Automatically Log On Dialog Box
6.In the Password text box, type the new DX8100ADM password.
7.In the Confirm Password text box, retype the password again.
8.Click OK and then restart the DX8100 server. The unit will restart and automatically log you on to the DX8100 server application.
| 13 |