DX8100 NETWORK PORTS
Table B describes the DX8100 ports and their functions. The ports are classified either as
|
| Table B. Open Ports on the DX8100 |
|
|
|
PORT | Function | |
|
|
|
80/tcp | No | HTTP (Hyper Text Transfer Protocol) forms the basis for Web page transfer over the Internet. Ports |
|
| are reserved for |
135/tcp, udp | No | End Point Mapper (EPMAP), a Microsoft RPC locator service |
|
|
|
137/tcp, udp | No | File/print sharing (NetBIOS name service) |
|
|
|
1028/tcp | No | Remote Procedure Call (RPC) |
|
|
|
1801/tcp | No | Message queuing |
|
|
|
1900/udp | No | Universal |
|
|
|
2103/tcp | No | Message queuing |
|
|
|
2105/tcp | No | Message queuing/logon |
|
|
|
2107/tcp | No | Message queuing |
|
|
|
2869/tcp | No | UPnP |
|
|
|
9002/tcp | Yes | DX8100 base port, used for transmission of video, audio, and interface data |
|
|
|
9003/tcp | Yes | DX8100 software upgrade port, used for remote upgrade of DX8100 software |
|
|
|
9005/tcp | Yes | DX8100 information port |
|
|
|
NOTE: Unless there is a conflict on your network, it is recommended that you do not change port numbers from their default settings. Make sure any changes to port numbers are made consistently across all DX8100 servers and clients on a network.Client and server ports must be identical.
The DX8100 port functionality is summarized as follows:
•Base port: This port is configured at the DX8100 Network setup screen. The base port number is downloaded to the PC client system during an IP scan. The port number can be modified at the DX8100 Site setup screen.
•Software Upgrade Port: This port is configured at the DX8100 Network setup screen. The upgrade port number is downloaded to the PC client system during an IP scan. The port number can be modified at the DX8100 Site setup screen. The PC client’s upgrade port number must match the DX8100 server’s upgrade port number. For
•Agent Port: This port is configured at the DX8100 Notification setup screen. You change the client emergency agent server listening port using the Emergency Agent application running on the PC client system. For more information about changing the client emergency agent listen port, see the Client Applications manual.
•Other reserved ports: Ports
APPLICATION SOFTWARE
The only application intended and guaranteed to work on the unit is the DX8100 application software itself. Do not install other application software. If you do, this voids the warranty on the unit, and it also opens up potential holes in the system security. The DX8100 application software has several user and group accounts with varying degrees of rights and permissions on the system. Each account is password- protected. These accounts and passwords are completely different from the operating level account and password discussed in the previous section. The typical system operator will have to work only with application program level user names and passwords.
| 19 |