Pelco DX4500, DX4600 manual Logging OFF, Turning OFF the DVR, Keyboard to enter the password

• Using the mouse, click each password character.

5.On the front panel or remote control, press any of the arrow buttons to select OK, and then press ENTER. Using the mouse, click OK. The system logs you on and the Login icon turns blue, indicating you have successfully logged on to the DVR.

LOGGING OFF

TURNING OFF THE DVR

You must be logged on to the DVR with administrator level permission to turn off the DX4500/DX4600.

1.On the front panel or remote control, press and hold the POWER button until you hear a beep.

•If you are not logged in at the Administrator level, do the following:

(1)Log in at the Administrator level.

(2)Press and hold the POWER button until you hear a beep.

The Login dialog box opens. You have approximately 20 seconds to enter the password, before the dialog box closes.

•Click each password character on the virtual keyboard.

Asterisks representing each password character are displayed in the Password entry box.

3.On the front panel or remote control, press any of the arrow buttons to select OK, and then press ENTER. Using the mouse, click OK. The system turns off.