VIEWING VIDEO
If you have not already done so, install the
NOTE:
Video from an Endura system camera (connected to an Endura encoder) can be viewed in the following ways:
•As a digital signal routed to the matrix switcher through the
•As an analog signal: This option is available if your system includes an optional analog connection between the Endura system camera (through the Endura encoder) and the matrix switcher. To view analog video, simply select the logical camera number that corresponds to the input on the matrix switcher used for the analog connection.
NOTE: In a system using the optional analog connection, the alternate cameras feature provides an easy way to switch from live analog video to digital video recorded on the Endura NVR. Refer to Using the Alternate Cameras Feature on page 48 for instructions.
To view digital video from an Endura camera, complete the following steps:
1.Log on to the keyboard and select a monitor connected to the matrix system.
2.Select the logical number of the camera from the Endura system that you want to view. This logical number is the number designated through the
3.Video from the Endura system camera appears on the matrix system monitor. The video is either live video from the camera or recorded video from an Endura system NVR, depending on what setting you selected for the Live On Switch field in the
•Live video is displayed on the matrix system monitor with a green border.
•Recorded video is displayed on the matrix system monitor with a yellow border, and the video starts at 30 seconds back from the present.
When video from an Endura system camera (either live or recorded) is displayed on the matrix system monitor, the keyboard LCD displays DVR Menu 1.
EXIT ICON 
Figure 47. DVR Menu 1
NOTE: To return to the default
4.Use the keyboard joystick and icons to view and control the video. For instructions on viewing and controlling the video, refer to Viewing and Controlling Video on page 43.
| 41 |