Pelco C1570M-E (4/07) manual Current Mode = Play, Play Recorded Video in Reverse, Playback Speed

Page 47

Current Mode = Play:

To the right a little: video plays at 2x (momentary).

To the right a little more: video plays at 4x (momentary).

To the right all the way: video plays at 2x (latching).

To the right all the way again: video plays at 4x (latching).

To the right all the way again: video plays at 8x (latching).

To the right all the way again: video plays at 16x (latching).

To the right all the way again: video plays at 32x (latching).

To the left all the way: video speed decreases one level (latching); for example, if video is playing at 8x, moving the joystick all the way to the left decreases the speed to 4x.

To the left all the way from 1x: video plays at 12x (latching); moving the joystick all the way to the left from 12x changes the playback to reverse.

NOTE: Figure 52 illustrates the playback speeds and the progression of speed settings.

Play Recorded Video in Reverse

Move the joystick to the left. The speed and mode depends on the current mode and the distance from center that you move the joystick, as follows (refer to Playback Speed for an explanation of the abbreviations used in this section):

Current Mode = Pause:

To the left a little: video plays at -12x (momentary).

To the left a little more: video plays at -1x (momentary).

To the left all the way: video plays at -2x (latching).

To the left all the way again: video plays at -4x (latching).

To the right all the way: video decreases speed from -4x to -2x (latching).

Current Mode = Play:

To the left a little: video plays at -2x (momentary).

To the left a little more: video plays at -4x (momentary).

To the left all the way: video plays at -2x (latching).

To the left all the way again: video plays at -4x (latching).

To the left all the way again: video plays at -8x (latching).

To the left all the way again: video plays at -16x (latching).

To the left all the way again: video plays at -32x (latching).

To the right all the way: video speed decreases one level (latching); for example, if video is playing at -8x, moving the joystick all the way to the right decreases the speed to -4x. This continues until the video speed is at -12x; the next movement to the right changes the playback to forward.

NOTE: Figure 52 illustrates the playback speeds and the progression of speed settings.

Playback Speed

12x = half normal speed

1x = normal speed

2x = two times normal speed

4x = four times normal speed

8x = eight times normal speed

16x = sixteen times normal speed

32x = thirty-two times normal speed

Negative values (such as -8x) indicate reverse playback.

Figure 52 illustrates the playback speeds and the progression of speed settings.

-32x -16x

-8x

-4x

-2x

-1x

1x

2x

4x

8x

16x

32x

Figure 52. Playback Speed Timeline

C1570M-E (4/07)

47

Image 47
Contents CM9700MDD-EVS Matrix Digital Decoder Page Contents List of Illustrations List of Tables Regulatory Notices Regulatory NoticesCompatible Products Optional AccessoriesRecommended Power Supplies DescriptionRear View Front ViewImportant NOTE. Please Read Sample ApplicationBefore YOU Begin InstallationHardware Installation Overview Parts ListProduct Serial Number Label Product Serial Number Label PlacementMounting Desktop InstallationTighten the Thumbscrew to Secure the Unit Wall Mount InstallationTighten Thumbscrew to Secure the Unit Rack Mount InstallationPelco Badge Orientation Pelco Badge OrientationPin Label Lead Basic Hardware ConnectionsCM9700-CC1 Connection CM9700-CC1 Pin LeadCable Type Maximum Distance Matrix BAY ConnectionCamera Monitor Camera CM9700MDD-EVS Camera Speaker Connector TipConnector Sleeve Common Audio Output ConnectionNetwork Connection NetworkWire Gauge Maximum Distance Power ConnectionUnits Powered Connecting the Power Software Configuration Additional Optional ConfigurationMacro Configuration Network Video Recorder ConfigurationADD the CM9700MDD-EVS to the Matrix System Configuration Port Configuration Configuring CM9700MDD-EVS Settings Configure the CM9700MDD-EVS SettingsClick Next. The Device Identification page opens ADD Endura Cameras to the Matrix System ConfigurationClick Next, and then click Finish on the Add More Devices Configure a CM9700 Soft Alarm to Represent AN Endura Alarm WS5000 Add Script Dialog Box Macro ConfigurationC1570M-E 4/07 Sample NVR management scenario Network Video Recorder ManagementViewing NVRs in the Device Tree Configure a CM9700 Macro to Switch Video to a Backup NVR Associate a Soft Alarm with AN NVR Associate a Macro with a Soft AlarmExporting CM9700-MGR Configuration Files C1570M-E 4/07 Operation Front Panel IndicatorsDVR Menu Viewing VideoABC Live Video Digital Signal ConnectionsAnalog Signal Connections Viewing and Controlling Video22 Ptz Function Keyboard Icon Menu Using Digital Zoom Recorded Video OnlyPause Recorded Video Current Mode = PauseFunction Play Recorded VideoPlayback Speed Current Mode = PlayPlay Recorded Video in Reverse Using the Alternate Cameras Feature Mode Function Unit Status Indicator Light CONFIGURATION/RESET ButtonProblem Possible Causes Suggested Remedy TroubleshootingModel SpecificationsRecommended Power Supplies Product Warranty and Return Information ISO9001