2.Use the included six bolts, washers, and nuts to assemble the tilting mechanism. (Refer to Figure 2.)
a.Install a bolt, washer, and nut where each tilt arm attaches to the bottom of the wall mount bracket.
b.Install a bolt, washer, and nut on each tilt adjustment mechanism where it attaches near the middle of the wall mount bracket.
c.Finally, install a bolt, washer, and nut where the tilt adjustment mechanism attaches to the tilt arm. Attach so the tilt arm is completely upright (0 degrees in Figure 2) for attaching the monitor.
0°
NUT 
BOLT
5° | 10° |
15° | 20° |
Figure 2. Tilt Angle
C2230M (2/07) | 7 |