6.Refer to Figure 4. Lift the monitor and align the pegs of the four hangers with the grooves of the mounting bracket, then pull down on the monitor to secure it to the wall. Check that the plastic hangers are completely secured on both the right and left sides.
WALL
MONITOR
PIN (2 EA) | BRACKET |
Figure 4. Attaching Monitor to Wall
7.Insert the pins into the holes above the bottom hangers to prevent the hangers from lifting up and out of the bracket. The direction to insert them is from the outside to the inside of the bracket. This locks the hangers in place.
8.Set the tilt angle (refer to Figure 2). Be careful not to pinch your fingers when adjusting the angle.
C2230M (2/07) | 9 |