Pelco C2928M-QS (7/05) quick start Front Screw Securing Locations

Page 6

2. As each unit is placed in the second row, secure it to the front of the lower unit with two 6-32 x 3/8-inch screws. Refer to Figure 4.

FRONT SCREW CONNECTION POINTS

FRONT SCREW CONNECTION POINT DETAIL

Figure 4. Front Screw Securing Locations

6	C2928M-QS (7/05)

Image 6

Contents PMCD750 DLP Display Before YOU Begin DocumentationChassis Assembly Single DisplayWall Display First ROW Wall Display Second ROW and UP Tie-Back Connection PointsAlignment Pin Locations Front View Front Screw Securing Locations Vertical and Horizontal Connection Points Connecting Analog and Digital Sources Looping First DisplayConnecting RS-232 and RS-485 Control RS-232 and RS-485 ConnectionsInstalling Screens Screen RailsShaped Screen Slot Connecting Power SHUT-DOWN SequenceUsing The Remote Control MonitorAlignment and Adjustment Product Warranty and Return Information ISO9001