Philips FW-C390 manual Important notes for users in the U.K, Mains plug, How to connect a plug

Page 2

Important notes for users in the U.K.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows:

1Remove fuse cover and fuse.

2Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.

3Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp.

Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere.

How to connect a plug

The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or coloured black.

Connect the brown wire to the terminal marked L or coloured red.

Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires.

Copyright in the U.K.

Recording and playback of material may require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.

Italia

DICHIARAZIONE DI CONFORMITA’

Si dichiara che l’apparecchio FW-C390 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548.

Fatto a Eindhoven

Philips Consumer Electronics

Philips, Glaslaan 2

5616 JB Eindhoven,The Netherlands

Norge

Typeskilt finnes på apparatens underside.

Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.

For å redusere faren for brann eller elektrisk støt, skal apparatet ikke utsettes for regn eller fuktighet.

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

2

Image 2
Contents FW-C390 Mains plug How to connect a plugImportant notes for users in the U.K Copyright in the U.KDSC VEC Klass 1 laseraparat 157 107132 182Contents General Information Supplied accessoriesSafety information AcknowledgementRear connections PowerPreparations Antennas ConnectionOptional connection Inserting batteries into the remote controlConnecting other equipment to your system FM AntennaControls on the system and remote control Controls Basic Functions First time setup/power upTo reinstall Plug and Play Plug and PlaySwitching the system on Demonstration modeSwitching the system to Eco Power standby mode 1 Watt Dim modeVolume control Sound navigationAutomatic DSC-DBB selection DBB Dynamic Bass Boost Incredible SurroundPress Incredible Surround or INC Loading discs CD OperationDiscs for playback Load the discs with the label side facing upReplacing discs during playback Playing discsSelecting a desired track/passage Repeat and ShuffleTo review the programme Programming the disc tracksErasing the programme Radio Reception Tuning to radio stationsStoring preset radio stations Tuning to preset radio stations You have to exit Tuner mode before selecting News function Setting the RDS clockPress Clocktimer twice To cancel News functionPlaying tapes Tape Operation/RecordingLoading tape To playback a selected tape deckPreparation for recording Rewinding / Fast forwardingGeneral information on recording One touch recordingTo select another track during recording CD Synchronised start recordingDubbing tapes To stop dubbingTo exit without storing the setting Clock settingClock if it is set will be shown in standby mode View clockDeactivating the timer Clock/TimerTimer setting Activating the timer for the same presetExternal Sources Sleep timer settingTo deactivate the sleep timer Listening to external sourcesSpecifications Problem Solution MaintenanceTroubleshooting CD OperationRadio Reception Tape OPERATION/RECORDING