Philips FW-C390 manual Maintenance, Troubleshooting, Problem Solution, CD Operation

Page 29

Maintenance

Cleaning the Cabinet

Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives.

Cleaning Discs

● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not wipe in circular motion.

Do not use solvents such as

benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records.

Cleaning the disc lens

After prolonged use, dirt or dust may accumulate at the disc lens.To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner.

Cleaning the Heads and the Tape Paths

To ensure good recording and playback quality, clean the heads A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation.

Use a cotton swab slightly moistened with cleaning fluid or alcohol.

You also can clean the heads by playing a cleaning tape once.

C B A B C

Demagnetising the heads

Use a demagnetising tape available at your dealer.

English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to solve a problem by following these hints, consult your dealer or service centre.

Problem

Solution

CD OPERATION

 

 

 

 

 

“NO DISC” is displayed.

– Insert a disc.

 

 

– Check if the disc is inserted upside down.

 

 

– Wait until the moisture condensation at the lens

 

 

has cleared.

 

 

– Replace or clean the disc, see “Maintenance”.

 

 

 

 

“DISC NOT FINALIZED” is displayed.

– Use a finalised CD-RW or CD-R.

 

 

 

29

Image 29
Contents FW-C390 Important notes for users in the U.K How to connect a plugMains plug Copyright in the U.KDSC VEC Klass 1 laseraparat 132 107157 182Contents Safety information Supplied accessoriesGeneral Information AcknowledgementPreparations PowerRear connections Antennas ConnectionConnecting other equipment to your system Inserting batteries into the remote controlOptional connection FM AntennaControls on the system and remote control Controls To reinstall Plug and Play First time setup/power upBasic Functions Plug and PlaySwitching the system to Eco Power standby mode 1 Watt Demonstration modeSwitching the system on Dim modeSound navigation Volume controlAutomatic DSC-DBB selection DBB Dynamic Bass Boost Incredible SurroundPress Incredible Surround or INC Discs for playback CD OperationLoading discs Load the discs with the label side facing upSelecting a desired track/passage Playing discsReplacing discs during playback Repeat and ShuffleTo review the programme Programming the disc tracksErasing the programme Radio Reception Tuning to radio stationsStoring preset radio stations Tuning to preset radio stations Press Clocktimer twice Setting the RDS clockYou have to exit Tuner mode before selecting News function To cancel News functionLoading tape Tape Operation/RecordingPlaying tapes To playback a selected tape deckGeneral information on recording Rewinding / Fast forwardingPreparation for recording One touch recordingDubbing tapes CD Synchronised start recordingTo select another track during recording To stop dubbingClock if it is set will be shown in standby mode Clock settingTo exit without storing the setting View clockTimer setting Clock/TimerDeactivating the timer Activating the timer for the same presetTo deactivate the sleep timer Sleep timer settingExternal Sources Listening to external sourcesSpecifications Troubleshooting MaintenanceProblem Solution CD OperationTape OPERATION/RECORDING Radio Reception