Sony KDL- 32ML 13fi manual This TV can be installed on a wall by using a Wall, Model KDL-37M3000

This TV can be installed on a wall by using a Wall-

Mount Bracket (sold separately). Before mounting

the TV on a wall, the Table-Top Stand must be

removed from the TV.

•Do not remove the Table-Top Stand for any reason

other than to wall-mount the TV.

Follow tile simple steps below to remove tile Table- Top Stand:

1Disconnect all tile cables from tile TV.

2Gently lay the TV, face down, onto a level and stable surface covered with a thick and soft cloth. Make sure the Table-Top Stand is hanging over the edge.

3Remove the screws as shown in the illustration

for your model and pull the Table-Top Stand out.

4Do not remove any other screws from tile TV.

•Be sure to store the removed screws and Table-Top

Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children.

•For bracket installation, refer to the Wall-Mount insert

(supplied in the accesories) and the instruction guide

provided by the Wall-Mount Bracket model for your

TV. Sufl]cient expertise is required in installing this

TV. especially to determine the strength of the wall for

withstanding the TV's weight.

•For product protection and safety reasons, Sony

strongly recommends that you use the Wall-Mount

Bracket model designed for your TV and the wall-

mounting of your TV should be performed by a

Sony dealer or licensed contractor.

Use the following Sony TV's only with the

following WALL-MOUNT BRACKET.

KDL-26M3000 KDL-32M3000

KDL-26ML130 _KDL-32ML130

KDL-37M3000

SU-WLIO0 SU-WL500

•Use with other WALL-MOUNT BRACKET may cause instability and possibly result in ir_iury.

f

Model: KDL-26M3000

KDL-26ML130

KDL-32M3000

KDL-32ML130

Remove 3 designated screws only.

Model: KDL-37M3000

Remove 4 designated screws only.

Level surface	Table-Top	Level surface
covered with a	Stand		Table-Top
soft cloth		covered with a
		soft cloth	Stand

12