4.Setting Up the Channel List - Initial Setup
After you finish connecting your TV. you need to run Initial Setup, which autolnatically sets up available channels. The Initial Setup screen appears when you turn on your TV for the first time. If you do not want to set up the channels at this time, you can do it later by selecting the Auto Program option in the Channel menu (see page 30).
POWER
1Press @ to turn on the TV.
The Initial Setup screen appears.
2Press ,i,/,!, to highlight the desired language, then press @.
3The message "First please connect cable or antenna" and "Start auto program now?" appears, make sure you aheady connected Cable or Antenna, then select Yes
to start Auto Program. If you want to start
Auto Program later press No.
•If yon have Cable and Antenna available, please connect Cable first.
4The scanning of channels will start. If you want to stop and run Auto Program later press Cancel.
5When Auto Program is complete, press @ to continue
If the Initial Setup programming found Cable channels, you will be able to scan Antenna channels as well. Connect the Antenna, you can use an
To run Auto Program again at a later time
[] Use the Auto Program feature as described on page 30.
To Display the Picture in your Preferred Aspect Ratio
[] Select the proper Wide Mode as described on pages 23 and 29.
•You may want to set up convenient features such as Favorites (see page 26), Show/Hide Channels (see page 30), Label Channels (see page 30) when Auto Program is completed.
20