2 | Delta 1010 Quick Start Guide |
3.At various points in this installation process, you may be notified that the driver being installed has not passed Windows Logo Testing 2 . Click “Continue Anyway” to proceed with the installation.
4.Once the driver installer has completed, select “Yes, I want to shutdown my computer now” and click “Finish.”
5.When your computer has turned off, disconnect the AC power cable and open your computer’s case.
6.Touch your computer’s metal chassis to ground yourself before coming in contact with any electronic components inside the computer. Uncontrolled discharge of excess static electricity may cause damage to electronic components.
7.Each unused PCI slot should have a metal bracket that covers the slot’s accompanying access hole on the rear of the computer. Select one available PCI slot and remove its metal bracket. Be sure to save the bracket screw (brackets are usually held in place by one screw) as you will need it later.
Note: Note: Some of your motherboard’s PCI slots may be sharing resources with some of your computer’s other components (e.g. the USB controller or the AGP slot).
This may result in performance issues that are often difficult to pin down and resolve. As a preventive measure, please check your motherboard’s documentation in order to find an available PCI slot that does NOT internally share resources.
2