Delta 1010 Quick Start Guide

8.Insert your Delta 1010 PCI Host Adapter card into your chosen PCI slot. Secure the Delta 1010 PCI card in place using the bracket screw from the previous step. Close the computer case.

9.Connect the rack-mount portion of the interface to the Delta PCI card. Plug in the power adapter into the rear of the rack-mount portion of the Delta 1010, then reconnect the computer’s power cord. Finally, turn on the computer.

10.When Windows boots up, it will identify the new Delta 1010 hardware and will ask if you want to search the Internet for a driver. Select “No, not this time” and press “Next” 3 .

11.Windows will display a “Found New Hardware” Wizard 4 .

12.Choose “Install software automatically” and click “Next”.

13.Once the wizard is completed, click “Finish”.

14.Once the installation is complete, you will see a message pop up stating, “Your new hardware is installed and ready to use.”