Hitachi VT-FX795A owner manual Playback Function

To Add/Delete Channels

When the VCR automatically programs the tuner to scan only the channels you receive in your area, some chan- nels may be skipped due to weak signal. You can manual- ly add the channel in the VCR memory.

- MENU -

	1	Press [MENU] until the main	TIMER PROGRAMMING
			AUTO REPEAT	[OFF]
		menu appears.	CHANNEL SET UP
			CLOCK SET
			LANGUAGE SELECT
2		Select "CHANNEL SET UP" by	AUDIO OUT	[ON]
			TV STEREO
			SAP
		pressing [PLAY] or [STOP].

Clock Set Up

1		Select main menu by pressing [MENU].(If the
		clock is not set, the CLOCK SET menu appears
		first. In this case, follow step [3].)
2		Select "CLOCK SET" by pressing [PLAY] or
		[STOP]. Then, press [F.FWD].
	3	Set the clock.

		Then, press [F.FWD].
3		Select "MANUAL SET UP" by pressing [PLAY]
		or [STOP]. Then, press [F.FWD].
4		Enter the desired channel number by pressing
		[PLAY] or [STOP].
5		Add or Delete it from memory by pressing
		[F.FWD] or [REW] so that "ADD" or "DELETE"
		flashes on the TV screen accordingly.
	6	Exit the Preset mode by pressing [COUNTER

Set the month

Set the day

Set the year

Set the hour

Set the minute

Set the AM

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

Press [PLAY] or [STOP]repeatedly. Then, press [F.FWD].

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

The day of the week will appear automatically.

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

Press [PLAY] or [STOP] repeatedly. Then, press [F.FWD].

Press [PLAY] or [STOP]

RESET/EXIT].

or PM

repeatedly.

CLOCK SET

	To Change the On-Screen Language
1	Press [MENU] until the main menu appears.
2		Select "LANGUAGE SELECT" by pressing
		[PLAY] or [STOP]. Then, press [F.FWD].
3		Select "ENGLISH" , "FRANCAIS" or
		"ESPAÑOL" by pressing [PLAY] or [STOP].

Then, press [COUNTER RESET/EXIT].

•If you accidentally select Spanish or French and need English: Press [MENU] and choose SELEC. IDIOMA, or SELECTION LANGUE. Press [F.FWD], and select ENGLISH. Finally, press [COUNTER RESET/EXIT].

MONTH DAY YEAR 03 / 17 MON 2003

HOUR	MINUTE	AM/PM
05	: 40	PM AM
		PM

•To go back one step, press [REW].

4	Start the clock by pressing [COUNTER RESET/EXIT]
	or [F.FWD].

PLAYBACK FUNCTION

	Normal Playback				4 To stop playback, press [STOP].
		Insert the prerecorded tape. The VCR will turn
1 on. If the safety tab has been						Counter Reset
					• You can reset the counter by pressing [COUNTER
		removed, the VCR will start playback
						RESET/EXIT] on the remote control
		automatically.
		Turn on the TV and set the TV to channel 3. If				Still / Slow
					You can freeze the picture on TV screen by pressing
2 channel 3 is already occupied for broadcasting,
					[PAUSE] during playback.
		change the RF output to CH 4, and change the				• You can advance the picture by one frame at a time
		TV channel to CH4. (See “RF Output Channel”
						by pressing [PAUSE] during the still mode.
		on page 3 for the detail.)
						• If the picture begins to vibrate vertically during the
3		Begin playback by pressing [PLAY].				still mode, stabilize the picture by pressing
						[CH (	) ].
	• Tracking adjustment will be set automatically					• If the picture is distorted or rolling vertically, adjust
		(Digital Tracking function) when you start playback.				the vertical hold control on your TV, if equipped.
		To adjust the tracking manually, press			You can see the slow motion by pressing [SLOW]
		[CHANNEL (	) ] on the VCR.		during playback or the still mode.
	• You cannot manually adjust the tracking of a Still					• If the noise bar appears on the TV screen, you can
		picture. However, you may press [CHANNEL (		) ]		reduce it by pressing [CH (		) ].
		on the VCR to remove vertical jitter in a Still picture.				• After the VCR has been in Still/Slow mode for 5 min-
	• When a tape has reached the end, the VCR will					utes, it will stop automatically to protect the tape and
		rewind the tape to the beginning, eject the tape,				the video head from damage.
		and turn off the VCR automatically.				• To return playback, press [PLAY].

•S-VHS Quasi Playback (SQPB): This unit allows you to view a tape recorded in S-VHS format. (Noise lines may appear on the picture.)

– 4 – EN