Furuno MU-155C manual Changing the signal name, Custom Name area

3.3.2Changing the signal name

You can change the signal name which is shown on the DISP or PIP window, described in the next chapter. It is useful to use the name of the device connected (ex. “FCV-1200L”). For detailed information about these windows, see Chapter 4.

1.Press the [MENU] key to show the main menu.

2.Press the [◄] or [►] key to select OSD.

CUSTOM NAME area

RGB1 RGB2 DVI VIDEO1 VIDEO2 VIDEO3 OSD SYSTEM

H_POSITION		15	(1 – 29)
V_POSITION		37	(1 – 37)
TRANSLUCENT		OFF	(OFF/ON)
CUSTOM NAME
RGB1	= RGB1______
RGB2	= RGB2______
DVI	= DVI_______
VIDEO1	= VIDEO1____
VIDEO2	= VIDEO2____
VIDEO3 = VIDEO3____
			OSD menu

3.Press the [▲] or [▼] key to select the signal to change its name in CUSTOM NAME area. In the example above, RGB1 is chosen.

4.Press the [►] key to select the character you want to change. In the example below, “G”

is selected.

CUSTOM NAME

RGB1	= RGB1______
RGB2	= RGB2______
DVI	= DVI________
VIDEO1	= VIDEO1____
VIDEO2	= VIDEO2____
VIDEO3	= VIDEO3____

5.Press the [▲] or [▼] key to select appropriate alphanumeric character. In the example below, “5” is selected.

CUSTOM NAME

RGB1	= R5B1______
RGB2	= RGB2______
DVI	= DVI________
VIDEO1	= VIDEO1____
VIDEO2	= VIDEO2____
VIDEO3	= VIDEO3____

6.To change another signal name, press [◄] and then press [▲] or [▼] to select it.

7.Press the [MENU] key to close the menu.

11