Search Features, About Index Marks | GoVideo DVR4300 instruction

4Repeat this process until all chapters/tracks are added in the desired order.

• To change a selection, press CLEAR.

5When finished adding Chapters/Tracks, press PLAY/PAUSE "/. The disc will play in the programmed order.

6To cancel Programmed Play, open the disc drawer.

:: Search Features

About Index Marks

Index Marks are like bookmarks on your VHS tapes that help you easily find the start of any recording. Index Marks are inserted automatically during standard recording, one-touch recording, timer recording, or copying. You can also place Index Marks manu- ally anywhere on a tape by pressing the SEARCH/INDEX button while a recording is in progress. Later you can search or scan for these bookmarks in the Search Menu.

Index Search/Scan

To search or scan for specific recordings:

1Insert a VHS tape with recorded material in the VCR deck.

2While the tape is stopped or playing, press SEARCH/INDEX.

3Press Y/B and " to select Index Search/Scan:

Index Scan Press FF "" or REW AA to begin scanning forward or backward. When an Index Mark is found, the tape will play for 5 seconds. If it is the scene you want, press PLAY/PAUSE "/. If it is not, the

DVD+VCR will automatically search for the next Index Mark.

Index Search Enter an Index number from 1 to 99 (e.g., for 5 press 0-5), then press FF "" or REW AA to begin searching forward or backward. When the VCR locates the specified Index Mark, it will play the tape.

•Use the Date/Time Stamp with Index Scan to make it even eas-

ier to find Timer Recordings on your tapes. For example, when Index Scan stops at an Index Mark, you will see the date and time the show was recorded.

•VISS, or VHS Index Search System is the VHS standard for indexing tapes and is compatible with tapes made on other VCRs and camcorders using the VISS system.

Advanced BasicSetup Connections Getting Features OperationsStarted

Help