Notice for use
To set up your monitor, please see the illustrations below.
Note: Do not touch the monitor within the screen area. The screen area is glass and can be damaged by rough handling or excessive pressure.
1.Place your monitor with the screen face down on a soft flat surface.
2.Align the stand assembly bracket to the monitor.
3.Insert the bracket towards monitor until it locks in place.
Note: To install a VESA mount, please see "Wall Mounting (Optional)"on page
To install monitor shading hood, please see the illustrations below.
1. |
|
| 2. | 3. | 4. |
2 |
| 3 | 2 |
|
|
| 1 |
|
| ||
|
|
|
| ||
|
| 1 | 3 |
| |
|
|
|
| ||
5. |
|
| 6. |
| 7. |
1.Lay the top cover 1 of the shading hood flat.
2.Align the locks on hood leaf 2 bottom to corresponding hooks on the side of hood cover 1 (Picture 1).
3.Fasten the locks by pushing the hood leaf 2 in the direction of the arrow as indicated in Picture 2, until the hooks are tightly locked in place. Repeat the same procedure
(Picture 1, 2 and 3) to set up the other hood leaf 3 .
4.Shading hood installation complete.
5.Turn the properly installed shading hood upside down as indicated in Picture 5.
6.Put the shading hood over the monitor, then slide it down into the slide rail on the side of monitor frame until the shading hood stops at bottom.
Chapter 1.