Go-Video 9100 manual On-Screen Display, Screen Display Settings

Press “4” repeatedly to set SCREEN DISPLAY to:

On-Screen Display

The On-Screen Display (OSD) appears on your screen auto- matically when you turn on the power, press a deck function key (such as Play, Rewind, etc.), or change channels. It will disappear automatically after a few seconds.

To bring up the OSD manually, press the DISPLAY key on the remote control. If you do this, it will remain on the screen until you press DISPLAY again.

Below is an overview of the On-Screen Display:

The On-Screen Display also shows you:

• Copy Mode (see p.20)

• Timer Record Errors

and Status (see p.31)

• Edit List Information

(see p.33)

For a fully functioning OSD, set

Screen Display to Auto.

Screen Display Settings

You can adjust the status of the On-Screen Display in the DISPLAY SETTINGS menu.

1 Press the MENU button until the DUAL-DECK FEATURES menu appears.

2 Press “1” to select VCR SETTINGS/SET CLOCK.

3 Press “1” to select DISPLAY SETTINGS/CLOCK.

4

Auto - Fully functioning automatic On-Screen Display.

Tuner - Displays information about the Tuner, but not about the two decks (convenient for “channel surfers”).

Tape - Displays information about the two decks but not about the Tuner (convenient for editing tapes).

Off - On-Screen Display is off (you will still be able to bring

up the On-Screen Display manually by pressing DISPLAY on your Remote Control).

12DUAL-DECK VCR USER'S GUIDE