Go-Video 9100 manual Audio Insert

Audio Insert gives you the

option of adding a new audio

track to your copies

Audio Insert

You can add taped music or voice-overs to your copies with Audio Insert. When Audio Insert is on, the audio signal comes from the Audio In jacks on the front or rear panel.

1 Press MENU until the DUAL-DECK FEATURES menu appears.

2 Press “2” to select COPY TAPE SETTINGS.

3 Press “4” repeatedly to set AUDIO INSERT to:

Off - Audio Insert is disabled.

Line 1 - Audio signal comes from the Audio In jacks on the front panel. This new audio signal replaces the tape’s original audio track.

Line 2 - Audio signal comes from the Audio In jacks on the rear panel. This new audio signal replaces the tape’s original audio track.

Note: When you are finished using Audio Insert, be sure to go back and turn this feature off; otherwise your subsequent copies may not have audio (i.e., if there is no signal from Line 1 or Line 2).

CHAPTER 4 - COPY FEATURES 21