JVC HR-A430E, HR-A437E, HR-A433E, HR-A237E Edit To Or, From Another, Video, Make Connections

NOTE:

All necessary cables can be obtained from your dealer.

START RECORDING DECK

Engage its Play mode.

3

4 Engage its Record mode.

START SOURCE PLAYER

SET RECORDING DECK’S INPUT MODE

20EDITING

		You can use your video recorder as the source player or the
Edit To Or
		recording deck.
			MAKE CONNECTIONS
From Another	1		Connect the player’s AUDIO/VIDEO OUT connector to
			the recorder’s AUDIO/VIDEO IN connector.
			When Using Your Video Recorder As The Source
Video			Player . . .
			. . . connect its AV1 IN/OUT connector to the recording
			deck.
Recorder			When Using Your Video Recorder As The Recording
			Deck . . .
			. . . you can use the AV1 IN/OUT or AV2 IN connec-
			tors. However, the AV2 IN connector is only
			available on the A233E, A237E and A433E.

	2			Set to AUX. With this video recorder, press NUMBER
1	2	3
				key "0" and/or TV PROG. to select depending on the
4	5	6		2 connector being used — “AU 1” or "AU" for the AV1
				IN/OUT connector, or “AU 2” for the AV2 IN
7	8	9		connector.
NUMBER "0"	0			● (For A233E and A433E) When using the AV2 IN
				connector, make sure the AV2 SELECT switch is set to
			TV PROG.	"AV2".

3

1

TV Receiver	Player	Your recorder	Recorder	Your recorder	TV Receiver
VIDEO	AV2 SELECT		AV2 SELECT
	switch	21-pin SCART Cable	switch			VIDEO
CHANNEL
						CHAN-
		(not provided)
			21-pin SCART
				RF Cable (provided)		NEL
RF Cable (provided)
			Cable (not provided)
	Another recorder		Another recorder
	Recorder		Player