JVC HR-A230E Select NEW Position, Select NEW Station, Switch Stations, Enter NEW Character

2	SELECT NEW POSITION
	Press PUSH JOG%Þ to move the station to the new
	channel position, then press OK.
	Example: If you moved the station in position 3 to
	position 7, the stations originally in positions 4–7 each
	move up one position.
	● Repeat steps 1 and 2 as necessary.
	RETURN TO NORMAL
3	DISPLAY
	Press CH SET.

Perform steps 1 and 2 of "Storing Channels Manually" on page 22 to access the Confirmation display before continuing.

Set Stations (A)

1	SELECT ITEM
	Press PUSH JOG%Þ until the item you want is
	displayed. Then press OK twice and the station’s name
	(or "– –") begins blinking.

2	SELECT NEW STATION
	Press PUSH JOG%Þ until the new station’s name you
	want to store begins blinking.
	Registered station names (☞ pg. 24) appear as you
	press PUSH JOG%Þ.

3	SWITCH STATIONS
	Press OK.
	● Repeat steps 1 through 3 as necessary.
	RETURN TO NORMAL
4	DISPLAY
	Press CH SET.

Set Stations (B)

NOTE:

First perform step 1 of the above procedure.

SELECT STATION NAME CHARACTER

2 Press PUSH JOG % and the first letter of the station name (or "–") begins blinking.

23

ENTER NEW CHARACTER

Press PUSH JOG%Þ to cycle through the characters
(A–Z, 0–9, –,	*	, +,	]		%
				(space)) and stop when the
3 desired one is indicated, then press PUSH JOG						to
enter. Enter the remaining characters the same way
(maximum of 4).
After entering all characters, press OK.

●Repeat steps 1 through 3 as necessary.

● If you make a mistake, press PUSH JOG% %until the incorrect character begins blinking. Then enter the correct character by pressing PUSH JOG%Þ.

RETURN TO NORMAL

DISPLAY

4 Press CH SET.

Fine-Tuning Channels

Already Stored

SELECT CHANNEL TO

FINE-TUNE

1 Press PUSH JOG%Þ until the channel you want to tune is displayed.

ACCESS MANUAL CH. SET

DISPLAY

2 Press OK three times. The Manual Ch. Set display appears.

	● "OFF" (decoder setting) appears only with A233E or
	A433E.
3	PERFORM TUNING
	Press PUSH JOG%Þ until the picture is its clearest.
	Then press OK.
	● The Confirmation display appears.
	● Repeat steps 1 through 3 as necessary.
	RETURN TO NORMAL
	DISPLAY
4 Press CH SET.