Changing the level indicator mode
When shipped from the factory, the level indicator on the display shows the audio level setting.
You can change it by following the procedure below.
• AUDIO: Audio level indicator
•ANTENNA: Tuner sensitivity indicator
•OFF: Volume setting indicator
1.Press the SEL button for more than 2 seconds to set the preferred setting mode (see page 23).
2.Select “LEVEL” with the SEL button.
Current setting appears.
3.Press +/– to select the level indicator mode you want to use.
Each time you press the button, the level indicator mode changes as follows:
AUDIO ANTENNA OFF
Turning on/off the key-touch tone
You can deactivate the
•ON: Activates the
•OFF: Deactivates the
1.Press and hold the SEL (Select) for more than 2 seconds to set that “PSM” appears on the lowerpart of the display.
2.Select “BEEP” with the SEL button.
Current setting appears.
3.Press +/– to select the setting you want to use.
Each time you press the button, the setting changes as follows:
OFF ON
Notes:
•
•If you have connected an external amplifier,
ENGLISH
25