Timer Recording
Up to 8 timer recording programs can be made using Express timer programing method as far as a year in advance. Remember, the clock must be set before you can program the timer.
NOTES:
●If all the 8 programs have already been set, “PROGRAM FULL” appears on the TV screen.
●After timer recording is completed, the recorder turns off automatically.
●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.
●In case of a power failure after programing, the recorder’s memory backup keeps your selections (if the lithium battery is not exhausted).
Express Timer Programing
●Remember, the clock must be set before you can program the timer.
●Load a cassette with the record safety tab intact. The recorder turns on, and the counter is reset, automatically.
●Select the appropriate colour system with “PAL/MESECAM” and “NTSC” in Function settings.
DPress #. The recorder turns off automatically and “#” is displayed on the display panel.
NOTE:
●If the tape reaches its end during recording, the recording stops and “#”, “” and “$” on the front display panel blink.
To use the recorder while it is in timer recording standby mode
Press #, then press 1. After you use the recorder, press # again to put the recorder into timer recording standby mode.
Checking, cancelling or changing program settings
ADisengage timer
Press #, then press 1.
●When “AUTO TIMER” is set to “ON”, you do not have to press
#.
BAccess Program Check screen
Press ".
NOTE:
When the weekly serials are programed, a day of the week appears, when the daily serials are programed, “DAILY” appears.
CAccess Program screen
Press " again. Each time you press ", the next program’s Program screen appears.
DCancel or change program setting
PR START | STOP | CH | DATE | |
1 | 8:00 | 10:00 | 3 | 24.04 |
2 | 10:00 | 10:45 | 2 | 25.04 |
3 | 11:30 | 13:00 | 1 | 25.04 |
4 |
|
|
|
|
5 |
|
|
|
|
6 |
|
|
|
|
7 |
|
|
|
|
8 |
|
|
|
|
[ | ] : NEXT |
|
| |
| START | – P1 – | STOP |
|
|
|
| ||
| 8:00 |
| 10:00 |
|
|
|
| SP |
|
| DATE |
| TV PROG | |
| 24:04 |
| 3 |
|
|
|
|
| |
[ | ] : NEXT |
|
| |
A Press PROG on the remote control to access the Program screen.
B Press
● Press and hold START+/– or STOP+/– to increase the time in
EP (p).
● To
CPress OK or PROG.
●If “PROGRAM OVERLAPPED” appears, see “Program overlap warning display”.
To cancel a program, press & when the Program screen you do not want is shown.
To change a program, press the appropriate button:
EReturn to normal screen
Press " repeatedly until no Program screen is shown.
FReengage timer recording standby mode
Press #. The recorder turns off automatically and “#” is displayed on the display panel.
●When “AUTO TIMER” is set to “ON”, the timer recording standby mode automatically resumes when you turn off the recorder.