JVC HR-J588 You can set the B.E.S.T. Biconditional Equalised Signal, Playback, Lot of noise

Page 37

 

 

EN 37

 

 

* The default setting is bold in the table below.

 

 

 

8 B.E.S.T.

 

You can set the B.E.S.T. (Biconditional Equalised Signal

ON

 

Tracking) system to “ON” or “OFF” ( pg. 23).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture

AUTO:

Provides the optimised picture

quality according to your preference. Normally select

 

benefits of the B.E.S.T. Picture

“AUTO”.

EDIT:

System.

NOTES:

Minimizes picture degradation

 

during editing (recording and

● When you select “EDIT”, “SOFT” or “SHARP”, the selected

 

playback).

mode will not change until you select another mode.

SOFT:

● When you select “EDIT” to dub tapes, be sure to select “AUTO”

Reduces image coarseness when

after you finish dubbing the tapes.

 

viewing overplayed tapes containing

 

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches

 

a lot of noise.

SHARP:

automatically from “AUTO” to “NORM”.

Clearer, sharper-edged picture when

 

 

viewing images with lots of flat,

 

 

same-coloured surfaces such as

 

 

cartoons.

 

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is

ON

 

automatically engaged when the recorder power is turned

OFF

 

off, and automatically disengaged when the recorder is

 

 

powered back on.

 

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder

 

 

functions are disabled while the Timer mode is engaged. To

 

 

disengage the timer, press # (TIMER).

 

 

 

8 O.S.D.

 

When this function is set to “ON”, various operational

ON

 

indicators appear on the TV screen. Messages appear in

OFF

 

the selected language ( pg. 11 or 12).

 

 

NOTES:

 

 

● When you use this recorder as the source player for editing, be

 

 

sure to set “O.S.D.” to “OFF” before starting.

 

 

● During playback, the operation mode indicators may be

 

 

disturbed depending on the type of tape being used.

 

 

 

8 DIRECT REC

 

When this function is set to “ON”, you can easily start

ON

 

recording the programme that you are watching on your

OFF

 

TV. Press and hold 7 and press 4 on the remote control,

 

 

or press 7 on the recorder.

 

 

NOTES:

 

 

● When you use the Direct Rec function, be sure to use a TV

 

 

offering T-V LINK, etc. and connect a fully-wired 21-pin SCART

 

 

cable between the recorder and the TV ( pg. 7).

 

 

● If “DIRECT REC” is set to “OFF”, the 7 button functions as

 

 

described in “Basic Recording” ( pg. 20).

 

 

● During the Direct Rec, “– –” appears on the front display panel.

 

 

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View HR-J587/588/589EU Front View HR-J680/681/682EUFront Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the followingSelect the language Perform Auto Set UpOn the front display panel On the on-screen display10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 12 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections14 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 16 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playbackManual Tracking 18 ENInstant ReView Skip Search Index SearchNext Function Memory Repeat Playback20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration22 EN Reset the counterTape Remaining Time Receiving Stereo And Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set26 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Cancel or change a programme Check, cancel and change programmesReturn to the timer mode Disengage the timer modeConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Engage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording 30 ENSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderAnother Video Recorder Set the input mode of recording deck32 EN Start the source playerConnecting To a Satellite Receiver 34 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 38 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 44 ENSet Stations B Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 46 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program numberClock Set Access the Clock Set screen48 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Memory backup time Approx minMm x 94 mm x 278 mm HR-J587/588/589EU Scan systemConnecting To a Satellite Receiver Delete a Channel Auto Set UpLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner Set

HR-J681, HR-J588, HR-J589EU, HR-J682EU specifications

The JVC HR-J682EU, HR-J589EU, HR-J588, and HR-J681 are notable models in JVC's lineup of VHS VCRs, showcasing the brand's commitment to quality and innovative technology in the realm of video recording and playback.

The JVC HR-J682EU stands out with its advanced features, including a built-in digital tuner, which allows users to receive and record digital broadcasts directly. This model supports SLV (S-VHS) playback, offering enhanced picture quality for compatible tapes. Additionally, it features the Auto Set-Up capability that simplifies installation by automatically tuning to available channels. The HR-J682EU also includes a VCR Plus+ feature, which allows for easy programming of recordings via a simple numeric code system, maximizing convenience for users.

The HR-J589EU offers a solid performance with similar features but is more focused on providing high-quality playback. It also supports S-VHS playback, ensuring that viewers can enjoy superior picture clarity with suitable tapes. This model includes features like the Jog/Shuttle dial, enabling effortless searching through tapes, as well as the capability for audio dubbing, allowing users to create audio commentary tracks on their videos seamlessly.

The JVC HR-J588 is another robust VCR model, known for its reliability and ease of use. It is designed with a more user-friendly interface, making it accessible for users of all ages. The HR-J588 incorporates features like Quick Start, which reduces the time it takes to begin playback after powering on, ensuring that users can enjoy their content without delay. This model also prioritizes accessibility with its straightforward remote control design.

Lastly, the JVC HR-J681 provides essential features with a focus on durability. While it lacks some of the more advanced functions of its contemporaries, its straightforward design and solid performance make it an appealing choice for those who prefer simplicity. This model is incredibly reliable, ensuring consistent playback and recording.

In summary, the JVC HR-J682EU, HR-J589EU, HR-J588, and HR-J681 offer a diverse range of features catering to various user preferences. From advanced digital tuning capabilities to user-friendly interfaces, these models exemplify JVC's dedication to delivering quality video solutions. These VCRs continue to hold their value as reliable devices for both casual viewers and avid recorders alike, maintaining a place in the hearts of those nostalgic for the classic VHS experience.
Top Page Image Contents