JVC HR-J588, HR-J589EU Perform Auto Channel Set, View the Confirmation screen, Press OK twice

Page 41

EN 41

IMPORTANT

●In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. If the Guide Program numbers are not set properly when you timer-record a TV programme using the SHOWVIEW system, the recorder will record a TV programme of a different station. When programming the

timer using the SHOWVIEW system, be sure to check the desired channel is selected correctly ( pg. 24, “SHOWVIEW® Timer Programming”).

●Your video recorder memorizes all detected stations even if

reception of some of them is poor. You can delete those stations with an unacceptable picture ( pg. 43, “Delete A Channel”).

NOTES:

●Fine tuning is performed automatically during Auto Channel Set. If you want to perform it manually, refer to page 44.

●If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED -NO SIGNAL-” appears on the TV screen in step 7. When this happens, make sure of the aerial connection and press OK; Auto Channel Set will take place again.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels ( pg. 43, “INFORMATION”).

F Perform Auto Channel Set.

Press OK twice.

● If you have connected the

 

 

recorder and your TV via AV

 

 

connection ( pg. 7), the

 

 

recorder automatically

 

 

performs the Preset

 

 

Download and the T-V LINK

 

 

screen will appear

 

 

( pg. 10).

 

 

● The Auto Set screen appears,

Beginning

End

and remains on screen while

the recorder searches for receivable stations.

As Auto Channel Set progresses, the “q” mark on the TV screen moves from left to right. Wait until the TV screen as shown in step 7 appears.

G View the Confirmation screen.

After “SCAN COMPLETED” is displayed on the TV screen for about 5 seconds, the Confirmation screen looking like the one to the right appears. The stations your recorder located appear on a Confirmation screen —

channel positions (PR),

channels (CH) and station names (ID –  pg. 45). The blueback screen and the programme currently being broadcast by the blinking station appear alternately for 8 seconds each. To view the next page, use the rt w e button on the remote control.

●The stations located in the selected country appear at the top of the list.

●The Guide Program numbers will also be set automatically during Auto Channel Set.

H Return to the normal screen.

Press MENU.

●Using the Confirmation screen, you can skip or add channel positions, enter station names and perform other operations. Refer to pages 42 – 45 for the procedures.

●Depending on reception conditions, the stations may not be stored in order, and the station names may not be stored correctly.

●For information on scrambled broadcasts, refer to page 43.

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View HR-J587/588/589EU Front View HR-J680/681/682EUFront Display Panel ON-SCREEN Display Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Before starting, make sure of the followingSelect the language Perform Auto Set UpOn the front display panel On the on-screen display10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 12 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections14 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 16 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playbackInstant ReView 18 ENManual Tracking Skip Search Index SearchNext Function Memory Repeat Playback20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration22 EN Reset the counterTape Remaining Time Receiving Stereo And Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set26 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +Cancel or change a programme Check, cancel and change programmesReturn to the timer mode Disengage the timer modeSelect the programme to modify Cancel or change programme settingConfirm the overlapping programmes Engage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording 30 ENSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderAnother Video Recorder Set the input mode of recording deck32 EN Start the source playerConnecting To a Satellite Receiver 34 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 38 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 44 ENSet Stations a Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 46 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program number48 EN Access the Clock Set screenClock Set Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Memory backup time Approx minMm x 94 mm x 278 mm HR-J587/588/589EU Scan systemConnecting To a Satellite Receiver Delete a Channel Auto Set UpLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner Set

HR-J681, HR-J588, HR-J589EU, HR-J682EU specifications

The JVC HR-J682EU, HR-J589EU, HR-J588, and HR-J681 are notable models in JVC's lineup of VHS VCRs, showcasing the brand's commitment to quality and innovative technology in the realm of video recording and playback.

The JVC HR-J682EU stands out with its advanced features, including a built-in digital tuner, which allows users to receive and record digital broadcasts directly. This model supports SLV (S-VHS) playback, offering enhanced picture quality for compatible tapes. Additionally, it features the Auto Set-Up capability that simplifies installation by automatically tuning to available channels. The HR-J682EU also includes a VCR Plus+ feature, which allows for easy programming of recordings via a simple numeric code system, maximizing convenience for users.

The HR-J589EU offers a solid performance with similar features but is more focused on providing high-quality playback. It also supports S-VHS playback, ensuring that viewers can enjoy superior picture clarity with suitable tapes. This model includes features like the Jog/Shuttle dial, enabling effortless searching through tapes, as well as the capability for audio dubbing, allowing users to create audio commentary tracks on their videos seamlessly.

The JVC HR-J588 is another robust VCR model, known for its reliability and ease of use. It is designed with a more user-friendly interface, making it accessible for users of all ages. The HR-J588 incorporates features like Quick Start, which reduces the time it takes to begin playback after powering on, ensuring that users can enjoy their content without delay. This model also prioritizes accessibility with its straightforward remote control design.

Lastly, the JVC HR-J681 provides essential features with a focus on durability. While it lacks some of the more advanced functions of its contemporaries, its straightforward design and solid performance make it an appealing choice for those who prefer simplicity. This model is incredibly reliable, ensuring consistent playback and recording.

In summary, the JVC HR-J682EU, HR-J589EU, HR-J588, and HR-J681 offer a diverse range of features catering to various user preferences. From advanced digital tuning capabilities to user-friendly interfaces, these models exemplify JVC's dedication to delivering quality video solutions. These VCRs continue to hold their value as reliable devices for both casual viewers and avid recorders alike, maintaining a place in the hearts of those nostalgic for the classic VHS experience.
Top Page Image Contents