JVC HR-VP48U manual Setting clock semiautomatically, Set Auto Clock to on, Select host channel

EN 11

Setting clock semiautomatically

— Semiauto Clock Set

You can change the host channel/D.S.T. /time zone setting manually.

First follow steps 1 to 3 on page 10, then go to the following steps.

4Set Auto Clock to ON

On the front panel:	CLOCK SET
Press CH5° to move	TIME	DATE YEAR
the highlight bar to
	1:00PM	12/24	00 SAT
“AUTO CLOCK”, then	AUTO CLOCK : ON
	HOST CH	: AUTO	(CATV)
press OK so that “ON”
	D.S.T.	: AUTO
is selected.	TIME ZONE	: AUTO
	PRESS (5,°), THEN (OK)

6 Select D.S.T. mode You have three choices:

AUTO– Select if you want to adjust your VCR’s clock automatically by the incoming signal from the host channel. (Auto Daylight Saving Time*)

ON– Adjustment will be made by the clock itself.

OFF– Select when Daylight Saving Time does not apply to you.

On the front panel:

Press CH5°to move the highlight bar to “D.S.T.”, then press OK repeatedly until the desired setting is selected.

On the Remote:

PRESS (MENU) TO END

On the Remote:

Press SHUTTLE PLUS 5° to move the highlight

Press SHUTTLE PLUS 5° to move the highlight bar to “AUTO CLOCK”, then press OK or SHUTTLE PLUS 3 so that “ON” is selected. Then;

To select the host channel — go to step 5. To select the D.S.T. mode — go to step 6. To select the time zone — go to step 7.

NOTE:

The time that has been set previously will be erased when “AUTO CLOCK”, “HOST CH”, “D.S.T.” or “TIME ZONE” setting is changed.

5 Select host channel

You can either select “AUTO” or enter a PBS channel number.

On the front panel:

Press CH5° to move the highlight bar to “HOST CH”, then press OK repeatedly until “AUTO” or the desired PBS channel number is selected.

On the Remote:

Press SHUTTLE PLUS 5° to move the highlight bar to “HOST CH”, then press OK or SHUTTLE PLUS 3 until “AUTO” or the desired PBS channel number is selected.

NOTE:

Some PBS channels do not transmit clock setting data.

* Auto Daylight Saving Time

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time.

With Auto DST activated, . . .

. . .	on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . .	on the last Sunday of October at 2:00 AM, the

clock is adjusted to 1:00 AM.

bar to “D.S.T.”, then press OK or SHUTTLE PLUS

3repeatedly until the desired setting is selected.

7 Select time zone

You can select the time zone automatically or manually.

On the front panel:

Press CH5° to move the highlight bar to “TIME ZONE”, then press OK repeatedly until “AUTO” or the desired time zone is selected.

Each time you press the button, the time zone changes as follows:

=AUTO= ATLANTIC= HAWAII= EASTERN

=ALASKA = CENTRAL PACIFIC

=MOUNTAIN = (back to the beginning)

On the Remote:

Press SHUTTLE PLUS 5° to move the highlight bar to “TIME ZONE”, press OK or SHUTTLE PLUS 3 repeatedly until “AUTO” or the desired time zone is selected (see above).

NOTE:

If an incorrect clock time is displayed by the Plug & Play setting, you may be receiving the clock setting data of a PBS channel from an adjacent time zone or from an incorrect PBS channel from a cable TV system. If you selected "AUTO" for the host channel in step 6, be sure to select the correct time zone manually.

8Return to normal screen

Press MENU.

IMPORTANT

Turn off the VCR after performing Semiauto Clock Set. ”Auto” will appear on the front display panel while the clock is being set. The current clock time will appear automatically when the clock setting is complete.