JVC HR-VP48U manual 34 EN, For Example

Page 34

34 EN

 

OTHER USEFUL FUNCTIONS (cont.)

 

 

* The default setting is bold in the table below.

 

 

 

 

 

AUTO SP = EP TIMER

When this function is set to “ON”, the VCR automatically switches to EP

ON

mode to allow complete recording if there is not enough tape to record

OFF

the entire program while timer-recording in SP mode.

 

For Example . . .

 

 

 

Recording a program of 210 minutes in length onto a 180-minute tape

 

 

Approximately 110 minutes

Approximately 30 minutes

 

 

 

 

 

 

 

SP mode

EP mode

 

 

Make sure you set this function to “ON” before the timer-recording starts.

 

NOTES:

 

 

 

If you have programed the VCR to timer-record 2 or more programs, the second

 

program and those thereafter may not fit on the tape with this function set to

 

"ON". In this case, do not use this function, but change the tape speed manually

 

during timer programing.

 

 

 

In order to ensure that the recording fits on the tape, this function may leave a

 

slight non-recorded portion at the end of the tape.

 

There may be some noise and sound disturbance where the tape speed switches

 

from SP to EP mode on the tape.

 

 

 

This function is not available during ITR (Instant Timer Recording), and will not

 

work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-

 

120.

 

 

 

 

 

 

 

VIDEO STABILIZER

When this function is set to “ON”, you can automatically correct vertical

ON

vibrations in the picture when playing back unstable recordings made on

OFF

another VCR.

 

 

 

NOTES:

 

 

 

When you finish viewing a tape, be sure to set this function to “OFF”.

 

Regardless of the setting, this function has no effect during recording and during

 

special effects playback.

 

 

 

The on-screen display may jitter vertically when this function is set to “ON”.

 

To watch recordings with close-caption, set this function to “OFF”.

 

 

BLUE BACK

When this function is set to “ON”, the TV screen becomes all blue in the

ON

following cases:

 

 

OFF

When receiving a channel not in use.

 

When stopping playback.

 

 

 

NOTE:

 

 

 

When you want to receive an unstable channel with poor signals, set this function

 

to “OFF”.

 

 

 

 

 

 

 

Page 33 Page 35
Image 34
Page 33 Page 35
Contents HR-VP48U Dear Customer Telephone NumberPower Cord Protection Power SourcesPower Lines Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Antenna or cable Audio OUT not supplied AC Power CordBasic Connections Coaxial cableConnect VCR to TV Check contentsSituate VCR Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Access Initial Set screen Language SettingAccess Main Menu screen Select languagePreparations Clock Setting10 EN Select clock setSelect host channel Setting clock semiautomaticallySet Auto Clock to on Select time zone12 EN Setting clock manuallySelect D.S.T. mode Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set 14 EN Setting channels manuallyAccess Manual Channel Set screen Add or skip desired channelsLoad a cassette Basic PlaybackStart playback Changing display information Basic Playback Features16 EN Checking tape positionActivate manual tracking Adjusting tracking conditionAutomatic operations after Eliminate the noises on the TV screen18 EN Locating beginning of timerAccess distant code Locating beginningSet tape speed Basic RecordingSelect recording channel Start recordingSpecifying recording length Basic Recording Features20 EN Watching one program while recording anotherErase on-screen display Showing on-screen displayDisplay VCR status on TV screen Other useful function for recordingLocating particular scene Special Effect Playback22 EN Rapidly Picture Search High-Speed Picture SearchViewing slow motion picture Viewing still pictureSkipping unwanted portions Pause during playbackAccess VCR Plus+ screen VCR Plus+ Timer Programing24 EN Input receiving channel number Engage timer recording standby modeTo use the VCR while it is in timer recording standby mode Press SP/EP26 EN VCR Plus+ SetupVCR Plus+ guide channel matching Access Guide Channel Set screen Input guide channel numberExpress Timer Programing 28 ENTo timer-record daily Monday-Friday or weekly serials Press SP/EP to set the tape speedChecking program settings 30 ENSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen 32 EN Useful Function SettingsChange setting Select FunctionWhen this function is set to on When this function is set to OFF34 EN For ExampleEdit To Or From Another ConnectionTroubleshooting 36 ENTimer Recording Can the VCR indefinitely remain in still mode? 38 ENWhat happens if the tape reaches its end during recording? VCR PLUS+ setup Manual setting Preparation Semiauto settingList of terms Front panel 40 ENFront display panel Rear panel On-screen display42 EN How to use the RemoteYou can operate JVCs TV Specifications HOW to Locate Your JVC Service Center 44 ENLimited Warranty 46 EN Page HR-VP48U

HR-VP48U specifications

The JVC HR-VP48U is a versatile and reliable VHS player/recorder that stands out for its impressive array of features and technologies tailored for home entertainment enthusiasts. Recognized for its robust build quality, this model offers exceptional playback and recording capabilities, making it a popular choice among both casual users and dedicated collectors.

One of the standout features of the HR-VP48U is its advanced video processing technology, which ensures that users experience high-quality playback. The player benefits from JVC's proprietary Super VHS (S-VHS) support, allowing for superior resolution and clarity compared to standard VHS. This enhancement is particularly appreciated by those who cherish their classic video collections. The model also supports various VHS formats, ensuring compatibility with a wide range of tapes, including standard VHS and S-VHS cassettes.

Another key characteristic of the HR-VP48U is its recording capabilities. The unit features a reliable time-shifting function, enabling users to record shows while watching others. The built-in tuner allows users to capture broadcasts in a range of formats, offering flexibility when scheduling recordings. Moreover, the ability to program recordings via the on-screen menu and timer makes it user-friendly, providing convenience for even the most technologically challenged users.

The design of the JVC HR-VP48U is straightforward, featuring an intuitive remote control that simplifies navigation through its various functions. The player provides accessibility options that cater to users seeking ease of use, including straightforward playback controls and a clear display panel.

The HR-VP48U is also equipped with multiple connectivity options, including composite video outputs, RF inputs, and audio outputs, allowing for seamless integration into existing home entertainment setups. This versatility ensures that users can easily connect the unit to modern TVs and audio systems, maximizing their viewing and listening experience.

In summary, the JVC HR-VP48U stands out as a reliable and feature-rich VHS player/recorder that effectively combines advanced technologies with user-friendly design. With its superior playback capabilities, robust recording features, and versatile connectivity options, it's an ideal choice for anyone looking to relive their favorite memories captured on tape while enjoying the convenience of modern functionality.
Top Page Image Contents