JVC HR-J461MS Remote Control Functions, Remove Power Supply, SET Remote Control Code

Page 24

24ENSPECIALFEATURES

Remote

Control

Functions

VCR

NUMBER "1"	1		2	3
NUMBER "1"
	4		5	6
	7	"2"	8	9
	NUMBER		0
			0

1

STOP

3

2

4

Remote A/B Code Switching

The remote control is capable of controlling two JVC video recorders independently; one set to respond to the remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B code signals.

REMOVE POWER SUPPLY

1 Unplug the mains power cord from the mains outlet.

SET REMOTE CONTROL CODE

2 While holding down VCR on the remote control, press the NUMBER key "2" and then press STOP.

RE-SUPPLY POWER

3 Plug the mains power cord back into the mains outlet.

TURN THE RECORDER ON

4 Press on the remote control. The recorder will now only respond to B code signals.

NOTE:

To set the recorder back to respond to A code signals, repeat the same procedure as shown above except pressing NUMBER key "1" instead of "2" in step 2.

Image 24

Contents HR-J461MS Safety Precautions Auto Head CleanerDo not place the recorder Check Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsAccess Video Channel SET Mode Video Channel SetSelect TV System EN I Nitial Sett IngsSET Video Channel Finish Video Channel SETFinish Video Channel SETAuto Set Up Select LanguageSET Time SET DateDuring Auto Set Up Start Auto Channel SETMajor Countries TV System Press OK or Push JOG ÞAccess Main Menu Screen ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Turn on the RecorderAccess Initial SET Screen Select LanguageClock Set PressPress Menu Press Push JOG %Þto place the pointer next toBasic Playback Load a CassettePoint Start PlaybackPlayback Features SearchPlayback Activate HIGH-SPEED SearchAdjust Tracking Manually Override Automatic TrackingActivate Instant Review Return to Automatic TrackingActivate Index Search Skip Over UnwantedSections EN PlaybackAccess Main Nenu Screen SET ModeTape Position Indicator Picture ControlBasic Recording Recording Features S.T. Picture System EN RecordingPreparation Recording PlaybackOr press Record on the recorder Express Timer Programming Timer RecordingEnter Programme Date Enter Channel PositionTimer Mode Return to NormalEngage Recorders Disengage Timer Mode Cancel or Replace a ProgrammeReturn to Timer Mode EN Timer RecordingAuto SP→LP Timer Auto TimerRemote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerTV Multi-brand Remote Control SET TV Brand CodeOperate TV SET Recording Decks Input Mode Edit To Or From Another Video RecorderMake Connections Start Source PlayerSET Recorders Input Mode Select Edit for Picture Control SET ModeEdit From a Camcorder Start CamcorderSetting Of The Colour System Select Buttons Mode DisplayMode Description Off-Air RecordingTape-To-Tape Editing Recorded tape HR-J461MSRecorded tape Playback equipmentAccess Tuner SET Tuner SETAuto Channel Set Access Channel List Select PositionSET Desired Station Manual Channel SetEN Tuner SET Delete a ChannelSwap Channel Positions Fine-Tuning Channels Troubleshooting If youre using the RF OUT connec- tionPress Play to turn the indicator off Check the cassette Try manual tracking. pgTimer again RecordingOubleshooting New one. pgQuestions and Answer S E N Playback RecordingIndex Front ViewDisplay Panel Remote Control Specification S EMO Memo HR-J461MS