JVC HR-J657MS specifications Express Timer Programming, Start Time, Enter Programme Stop Time

20EN

Express Timer Programming

Remember, the clock must be set before you can programme the timer (☞ pg. 9).

Before performing the following steps:

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

●Select the appropriate colour system by pressing the COLOUR SYSTEM button.(☞ pg. 28)

TIMERRECORDING

ACCESS TIMER PROGRAMMING SCREEN

1	Press PROG.. (If you’re just		– P1 –
	starting out, “P1” appears.)	START		STOP
			=
		–:– –		–:– –
				SP
		DATE		TV PROG
		– –.– –		– –
		[+/–] =
		[PROG] : EXIT
	ENTER PROGRAMME
	START TIME
	Press START +/– to enter		– P1 –
	the time you want	START		STOP
			=
2 recording to start.		21:00		–:– –
				SP
	● Press and hold START
		DATE		TV PROG
	+/– to move in 30-
	minute increments, or	– –.– –		– –
		[+/–] =
	press and release	[PROG] : EXIT
	repeatedly to move 1
	minute at a time.

COLOUR SYSTEM

1	2	3
		2
4	5	6
7	8	9
TOP+/	0	4
–

TV PROG+/–

START+/–

PROG.	1	DATE+/
		–

3

4

5

ENTER PROGRAMME STOP TIME

Press STOP +/– to enter the time you want recording to stop.

●Press and hold STOP +/– to move in 30-minute increments, or press and release repeatedly to move 1 minute at a time.

ENTER PROGRAMME DATE

Press DATE +/–. (The current date appears on screen. The date you enter appears in its place.)

ENTER CHANNEL

POSITION

Press TV PROG +/–.	– P1 –
START	STOP
21:00	= 22:00
	SP
DATE	TV PROG
25.12	1
[+/–] =
[PROG] : EXIT

3