JVC HR-J657MS Edit To Or From Another Video Recorder, Input Mode, Start Source Player, Editing

26EN

EDITING

Edit To Or

From Another

Video

Recorder

You can use your video recorder as the source player or the recording deck.

MAKE CONNECTIONS

1 Connect the player’s AUDIO/VIDEO OUT connector to the recorder’s AUDIO/VIDEO IN connector.

●Use the L connector for monaural connection.

SET RECORDING DECK’S

INPUT MODE

Set to AUX. With this video recorder, press NUMBER

key "0" and/or TV PROG to select depending on the

2 connector being used — “L-1” for the rear panel

VIDEO/AUDIO input connectors, or “F-1” for the front

panel VIDEO/AUDIO input connectors.

START SOURCE PLAYER

3 Engage its Play mode.

START RECORDING DECK

4 Engage its Record mode.

1 2 3

4 5 6

7 8 9

NUMBER "0" 0

1

2

4

TV PROG

NOTES:

●All necessary cables can be obtained from your dealer.

●NTSC tapes being played back in the NTSC [PAL mode (☞ p. 29) cannot be dubbed to another recorder.

●When you dub an NTSC tape using your recorder as the playback deck, select NTSC 3.58 (or NTSC 4.43) with the COLOUR SYSTEM button. (☞ p. 28)

IMPORTANT:

●To edit, both the player and the recorder must be of the same colour system. Press your recorder's COLOUR SYSTEM button to select the appropriate colour system.

●For more information on multi-system compatibility, ☞ pg. 28.

TV Receiver	Player	Your recorder	Recorder	Your recorder	TV Receiver
VIDEO	AV Cable				VIDEO
	(not provided)		AV Cable
CHANNEL					CHANNEL
			(not provided)
RF Cable (provided)				RF Cable
				(provided)
	Another recorder		Another recorder
	Recorder		Player